Wear resistant, tensile resistant, torsion resistant, tear resistant, weather resistant, heat-resistant and aging resistant flexible cable

NegotiableUpdate on 03/05

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Wear resistant, tensile resistant, torsion resistant, tear resistant, weather resistant, heat-resistant and aging resistant soft cables are insulated with polymer materials, and the nominal thickness of the insulation meets the requirements of national standards. The thickness of the Z-thin part should not be less than 90% -0.1mm of the nominal value. The conductor is made of tin plated copper, and the conductor structure meets the requirements of Table 1.

Product Details

1Wear resistant, tensile resistant, torsion resistant, tear resistant, weather resistant, heat-resistant and aging resistant flexible cableProduct Structure Diagram

conductor

insulating layer

Anti slip layer

Central reinforcement components

inner sheath

Weaving layer

outer sheath

IIWear resistant, tensile resistant, torsion resistant, tear resistant, weather resistant, heat-resistant and aging resistant flexible cablestructural dimensions

1Conductor:

Using tin plated copper conductor, the conductor structure complies with the table1The regulations.

2Insulation:

The insulation is made of polymer material, and the nominal thickness of the insulation meets national standardsAccording to the regulations, the thickness of the thinnest part should not be less than the nominal value90%-0.1mm.

3Central reinforcement components

The central reinforcement adopts high-strength twisted steel wire rope.

4Anti slip layer

Wrap a non slip layer longitudinally around the insulation and central reinforcement components.

5Cable formation

Multi core insulated wires are twisted at a certain pitch outside the central reinforcement.

6Inner sheath:

The inner sheath is made of imported polyurethane and is black in color. The nominal thickness of the outer sheath and the maximum outer diameter of the cable should comply with the table1The regulations. The thickness of the thinnest point on the outer sheath of the cable should not be less than the nominal value80%~0.1mm.