Walk in high and low temperature testing machine

Product Structure:

　　1.Walk in high and low temperature testing machinePlate assembly structure

The test box with this structure is assembled from independent plates, which are not only interlocked and fixed, but also reinforced with bolts to ensure strength, making transportation and installation more convenient.

2. Overall welding structure

This structure has a larger temperature/humidity range and a faster rate of temperature change than assembled boxes.

3. Pre packaged standard adjustment module

These modules provide great flexibility to maintain a constant environment, such as low temperature or low humidity, or you can create a dynamic, controlled environment to test multiple cycles of temperature and/or humidity changes in the product.

4. Basic functions

The walk-in test chamber can be programmed with a controller to dynamically cycle temperature and humidity, as well as perform insulation and moisture retention tests.

5. Common optional components

Common optional components for walk-in test chambers include split refrigeration units, ramp plates, air-cooled refrigeration systems, dry air blowing systems, as well as observation windows, chamber doors, and lead holes with special position and size requirements.

6. Low humidity system options

It can extend the dew point temperature to below 5 ℃. Strict pre factory testing: Step in test chambers undergo rigorous testing and reliability before leaving the factory

Product Technical Parameters:

1. Temperature range: Type A: -20 ℃~+80 ℃ Type B: -40 ℃~+80 ℃ Type C: -70 ℃~+80 ℃

2. Temperature stability ± 0.5 ℃

3. Humidity stability ± 2.5% RH

4. Temperature uniformity ± 2 ℃

5. Heating rate 1-3 ℃ per minute

6. Cooling rate 0.7-1 ℃ per minute

Walk in high and low temperature testing machine