Customized high and low temperature aging room -20~100 ℃

Customized high and low temperature aging room -20~100 ℃

We can provide temperature and humidity environment testing for large parts, semi-finished products, and finished products, which are mainly composed of control panels, distribution panels, insulation panels, air supply fans, heaters, humidifiers, and refrigerators. The main specifications are divided into seven standard indoor dimensions and 28 different testing specifications under different conditions. The content can be enlarged at will, easy to disassemble and assemble. The warehouse board is made of stainless steel and American resistant steel plate paint material, with a sturdy structure, waterproof, and American standards.

With the improvement of modern laboratory construction level, the complexity and difficulty of laboratory management work have greatly increased, and higher requirements have been put forward for the standardization and efficiency of work. The traditional laboratory management model is no longer suitable, and the intelligent transformation of traditional laboratories is the trend. Hubei Gaotian Experimental Equipment is your choice

Technical Specifications:

Aging quantity: to be determined by the customer;

Temperature range: -20 ℃ to 1000 ℃

The self electricity demand of the high-temperature aging room is about kW · h;

Heating time: From room temperature to 60 ℃ for less than 40 minutes, non-linear no-load

(The temperature change rate is the air temperature change rate, not the product temperature change rate.)

Temperature uniformity: ≤± 5.0 ℃ (under no-load conditions)

Temperature control method: Select 7 "human-machine interface+PLC temperature control system control system

PID is the control core, and automatic control function is achieved through relays

The exhaust system adopts an independent temperature control system

Individual time control and countdown function.

Temperature detection:

One indoor temperature detection point and one over temperature protection monitoring point. EGO protector for overheating on the surface of the heating tube.

The exhaust temperature is controlled by an independent temperature controller at an independent point inside the room to prevent the exhaust system from malfunctioning due to external factors.

Temperature display:

Automatic temperature control during the aging process.

Customized high and low temperature aging room -20~100 ℃