Walk in constant temperature room manufacturer

NegotiableUpdate on 02/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The walk-in temperature control room manufacturer's walk-in high and low temperature testing chamber is used for high and low temperature testing of products related to national defense industry, aerospace industry, automation components, automotive parts, electronic and electrical components, rubber, chemical, food, pharmaceutical industries, and thermometers. (Note that thermometers are generally used in conjunction with constant temperature water tanks and blackbodies when entering a room.)

Product Details

Walk in constant temperature room manufacturer

studio dimensions

2000 x 2000 x 2000mm (depth x width x height)+buffer room size 1000 x 2000 x 2000mm

The outer box size is approximately

4250 × 2100 × 2470mm (depth × width × height)

temperature range	25 ℃~50 ℃ (adjustable)
temperature fluctuation	±0.5 ℃
Temperature Uniformity	±1.0 ℃
Common constant temperature	To ensure a constant temperature of 25 ℃ during personnel entering and exiting the laboratory, a specialized buffer room is designed. After personnel enter the buffer room and close the door, they can then open the door to enter the laboratory.

Controller: The instrument panel is controlled by a Japanese original "OYO" or Korean "TIME880" intelligent LCD touch screen. The minimum reading of this instrument is 0.1 ℃, which can display the set temperature curve and the dynamic process of temperature rise and fall; Can display and control humidity; Having an interface for bidirectional communication with computers; More than 10 temperature ranges can be set in one experiment.

1. The electrical control cabinet is made of A3 board spray painted, and the overall design is basically made to match the room body, making its appearance more coordinated with the room body;
2. The temperature control instrument adopts fully imported (Japanese RKC) high-precision digital display P.I.D+S.S.R. The system coordinates with the microcomputer control instrument in the same channel, with high control accuracy and good stability, which can improve the stability and service life of control components and interfaces, effectively ensuring the fluctuation range of temperature and test operation;
3. Control accuracy: ± 0.1 ℃
4. Temperature sensor: Platinum resistor PT100Ω/mV
5. Touch sensitive settings, digital and direct display;
6. The automatic calculation function of P.I.D can reduce the inconvenience caused by manual setting;
7. Equipped with RS-232 or RS-485 communication interface, it can be programmed on a computer to monitor the testing process and perform functions such as automatic power on/off, printing curve data, etc;
8. In operation or setting, if an error occurs, a warning signal will be provided;

Walk in constant temperature room manufacturer

This machine can choose Chinese or English LCD touch screen display, with simple operation and easy program editing. It can display complete system operation status related data, execution and program setting curves. If an abnormal situation occurs during operation, the screen will automatically display the cause of the fault and provide troubleshooting methods.

To ensure a high uniformity index, the test chamber is equipped with an internal circulating air supply system and air ducts. Inside the air duct interlayer at one end of the studio, there are devices such as heaters, humidifier inlet pipes, refrigeration evaporators, dehumidification evaporators, and fan blades. Multiple fans are used to circulate the air inside the box. When the fans are running, the air in the working chamber is sucked into the air duct from the bottom, and after heating/cooling, humidification/dehumidification, it is uniformly blown out. The air exchanged with the test sample in the working chamber is then sucked into the air duct and repeatedly circulated to meet the temperature setting requirements.