UAQ-01 / UAQ-02 / UAQ-21 / UAQ-22 Portable spectrum analyzer

NegotiableUpdate on 03/01

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Android and Win10 Dual System Dynamic Spectrum Analysis and Equipment Fault Analysis Vibration Acceleration Gauge/Microphone/Impact Hammer Vibration Intensity ISO-10816 Detecting the original vibration waveform and recording 1/3 of the vibration noise analysis function IEPE Sensor interface with two channels 24 bits Synchronous sampling rate of 30 KHz

Product Details

Product Features

Android and Win10 dual system
Dynamic spectrum analysis and equipment failure analysis
Vibration acceleration gauge/microphone/impact hammer
vibration intensity ISO-10816 detection
Original vibration waveform recording
1/3 vibration and noise analysis function
IEPE Sensor interface
Two channels 24 bits Synchronous sampling
Sampling rate 30 KHz

Andriod Analyzer Software

Dynamic spectrum analysis and equipment failure analysis
Vibration monitoring and long-term vibration trend chart
Vibration total signal recorder
vibration intensity ISO-10816 Testing
Three units display vibration meters simultaneously
Original vibration waveform recording
1/3 vibration and noise analysis function
Vibration spectrum analysis
Diagnosis of machine equipment malfunction problems
Diagnosis of Imbalance Issues
Diagnosis of heart problems
Diagnosis of axis bending problem
Diagnosis of mechanical looseness problem
Diagnosis of Damage to Rolling Bearings
Vibration characteristics of shaft friction
Vibration characteristics of blades
Vibration characteristics of turbulence
Dynamic signal analysis/ NVH application
Mechanical fault diagnosis/on-site inspection of machines
Mechanical operation vibration measurement
Vibration analysis of sports equipment
Structural vibration analysis and measurement
Vibration reduction effect test
Machine rigidity testing/natural frequency measurement
Shock resonance test

Windows Analyzer Software

Time domain analysis, spectrum analysis
Rotating Machinery Analysis
Status monitoring trends, envelope analysis
Analysis of Vibration Characteristics with Poor Balance
Order tracking, trajectory analysis
Octave measurement of sound pressure
Environmental vibration testing
Extraction and analysis of impulse response spectrum
On site experimental data extraction and analysis
Damage problem of rolling bearings
Vibration analysis of fluid turbulence
Vibration analysis of blades
Vibration characteristics of pitting corrosion
Diagnosis of shaft bending vibration problem
FFT spectrum analysis
FRF Natural frequency tapping test
Real time octave doubling analysis
Order Tracking Analysis/ NVH application
Frequency band limit vibration measurement
Smoothness measurement/noise filtering
Trend analysis/Time domain analysis
Frequency domain analysis/time-frequency analysis
Vibration analysis of shaft friction
Diagnosis of Damage to Rolling Bearings
Vibration analysis of mechanical looseness
Vibration analysis of belts and pulleys

Ordering Information

UAQ21-MIL-02 -- 0.7meter spiral cable with 2 Pin MIL-C-5015 connector
UAQ21-BNC-002 --6cm cable with female BNC connector
UAQ22-BNC-005 -- 2 channels -- 15cm cable with female BNC connector
UAQ21-MDT-05 --1.5meter cable with Micro-Dot connector

Note :accelerometer /array microphone not included.

UAQ21 series Hardware Specifications
Maximal Input range	+/-5.0V
IEPE (Integrated Electronics Piezo-Electric)	24V / 4mA
AC coupling	< 3.0H
Maximal sampling rate	30.0KH
Minimal sampling rate	4.0KH
ADC resolution	24 bits
Type of ADC	Sigma-Delta ADC
Built-in filter	Anti-aliasing filter
Power consumption	5V / 80mA
USB interface	USB 2.0
C# DLL library	32/64 bits
Free Drivers	Win8/10
Mechanical size (L x W x H)	55.0 x 16.0 x 10.0 (mm)
Weight of UAQ	< 18.0 grams
Environmental temperature	10 – 60 degree C
Environmental humidity	25% - 80%

Note : the value depends on real application.
※Changes to appearance and specifications are subject to change without notice.