Taiwan Fangji FD7-150 Hydraulic Drilling Power Head

NegotiableUpdate on 10/16

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Taiwan Fangji FD7-150 Hydraulic Drilling Power Head

Product Details

The Taiwan Fangji hydraulic FD7-150 drilling power head provided by Ruixianxiang has a piping port flow valve position that can be changed to the L side. Positioning stop rod safety device, if used for a long time or pressurized, will reduce the service life of the bearing. When assembling multiple shaft heads, please use FD7M-150MT3B specifications or FD7M-150-MT3A multi axis and single axis shared. The drilling power head uses oil pressure of 20-35kg/cm2; Drilling capacity: Ø 25 (S45C).

The power head is widely used in marble, plastic, non-ferrous metals (metals), wood, ferrous metals, and steel; Die cast parts, forged parts, stamped parts, rolled parts, and stretched parts; Industries such as bathroom equipment, pipe fittings, fittings, automotive accessories (crankshafts, bicycle tees, handles, engine covers, carburetors, brake parts, locking equipment (locks), pneumatic pressure valves, pneumatic components (processing), solenoid valves (processing), electrical metal fittings, watch cases), etc.

		productname	FD7-150
		productcard	Fangji	place of origin	Taiwan
		Using hydraulic pressure	20-35kg/cm²
		Drilling capability	φ25(S45C)
		permissible rotational speed	1500rpm
		capital material down load	FD7-150 PDF Data Download
			FD7-150CAD Data Download
■specification		■consumables
Using hydraulic pressure	20-35㎏/cm2	spindle bearing	32008x1,6008Zx1,32007x1,6007Zx1
Drilling capability	φ25(S45C)	Belt pulley bearing	6013Zx1,51213x1
flow control valve	FCC-G03-8	Front cover oil seal	DH80x1,P-80x1,T601-80-90-6x1,G-105x1
Allowable return speed	1,500rpm	Piston Seal	P-100x2,G-65x1
Weight	63㎏	Rear cover oil seal	P55x1,T601-55-65-3x1,G-105x1
Total itinerary	150mm	When exceeding the allowable return speed, please specify. The position of the flow valve at the piping port can be changed to the L side. The positioning stop rod safety device, if used for a long time or pressurized, will reduce the service life of the bearing. When assembling multiple shaft heads, please use FD7M-150MT3B specification or FD7M-150-MT3A multi axis and single axis shared
Diameter of hydraulic cylinder	φ110
Hydraulic cylinder area	Advance 71.2cm²Step back 44.8cm²
Thrust	1420 kg (using pressure of 20 kg/cm2)
■Size chart

■Chuck selection