Swedish Atlas high-precision assembly electric screwdriver

Atlas high-precision assembly electric screwdriver!

SwedenAtlas EBL20-RE high-precision assembly electric screwdriver

SwedenAtlas EBL20-RE high-precision assembly electric screwdriverTechnical data
Order number 8431017019
Model EBL20-RE
1/4 "hex head adapter
M2-3 Tightening Capability
Straight model
Clutch stop system
Sound power<80 dB (A)
Sound pressure<70 dB (A)
Acoustic standard ISO15744
Acoustic uncertainty 3 dB (A)
Speed range 750 rpm
Torque range 0.5-2.0 Nm
Torque range 4.5-18 pounds
Motor voltage 20/V d.c
Motor power 15 W
Vibration standard ISO28927-2
Vibration uncertainty 1.0 m/s ²
Vibration value<2.5 m/s ²
Weight 0.5 kg
Weight 1.1 pounds

Swedish Atlas high-precision assembly electric screwdriverAnother form

Ergonomic Guidelines
When reading these ergonomic guidelines, please observe the workstation
Identify any improvement areas related to it
Operator posture, component position, or working environment.
• Take regular breaks and frequently change job positions.
Adjust the workstation area according to your needs and work requirements
• Set a comfortable distance range by determining where to place items and tools to avoid static loads.
Use workstation equipment as a suitable table or chair to complete tasks.
• Avoid working above the shoulders or static sealing during assembly operations.
Working on the shoulders, reducing the load on static muscles using tools such as torsion arms to lighten the weight, hose reels, or weight balancers. It can also reduce the load on static muscles by bringing tools closer to the body.
Check if there are frequent interruptions.
• Avoid the position of the arms or wrists, especially for operations that require a certain amount of force.
Adjust the field of view to minimize movement of the eyes and head during work activities.
Use sufficient lighting for the completed work.
Choose the right tools for the job being performed.
• Use acoustic protection in noisy environments.
Use high-quality tools or consumables to reduce exposure to excessive vibration levels.
Minimize exposure to reactive forces as much as possible.
During cutting: If the cutting disc is bent or not guided correctly, it may get stuck. Ensure to use appropriate flanges to cut the disc and avoid folding the disc during cutting operations.
During drilling: The drill bit can be locked when drilling. Be sure to support the handle if the stall torque is too high. Standard ISO11148 Part Safety recommends taking action to absorb reaction torque gun tools and linear tools with a torque of 4 Nm above 10 Nm.
When using direct drive or screwdriver tools:
The reaction force depends on the tool settings and characteristics, and the ability of the joint to maintain the reaction force depends on the resistance and posture of the operator. adjust settings
The tool is designed to handle the resistance and posture of the operator, as well as the use of torque arms or reaction force rods when the torque is too high.
• In dusty environments, use a dust removal system or a facial mask to protect the mouth. Check the tightening torque, torque, and angle verification tools. Test joints and sensors should be selected based on small and large torque. For proper operation and high safety, the tightening torque must be adjusted correctly according to the size of the screwdriver for the screw joint. Check the actual coupling torque. Adjust the tightening torque by changing the tension of the clutch spring. Rotate the protective ring until the hole in the clutch housing is released. Then rotate the output shaft to see the ring supervision in the gasket
Turning the adjustment key clockwise can reduce the torque, while turning it counterclockwise can increase it. When the adjustment is complete, rotate the ring protection again. The recommended equipment for checking tightening torque includes an A-Copco torque analyzer and a suitable sensor connected together

Shanghai Yipei TradeYi Co., Ltd. is a European trader of imported mechanical spare parts, dedicated to trade between China and Europe, China and the United States for a long time. Our main products include sensors, encoders, relays, welding consumables, instruments and automation peripheral products in Europe and the United States. Our goal is for domestic users to think of us when they encounter difficulties and difficulties in purchasing foreign spare parts. We can provide timely preferential prices and fast delivery times. When domestic users encounter monopolistic prices from domestic agents when purchasing foreign spare parts, they can think of us. We will provide users with an opportunity for comparison.

Shanghai Yipei has the following advantages：

We have a physical purchasing company and warehouse in Cologne, Germany. We have established good economic and trade cooperation with German and European peripheral manufacturers and agents for many years, and enjoy first-hand discounts from the original manufacturers. No middlemen make a profit from the price difference, providing customers with original and authentic products from the source. At the same time, we ship by LCL, with short delivery time and low logistics costs. Moreover, if customers have any questions, we can communicate one-on-one with the manufacturer to ensure their after-sales service.

Swedish AtlasCommonly used models in the brand section: