Split type anti-corrosion electromagnetic flowmeter

NegotiableUpdate on 03/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The split type anti-corrosion electromagnetic flowmeter mainly consists of a magnetic circuit system, measuring conduit, electrode, housing, lining, and converter. Its advantages are minimal pressure loss and a wide range of measurable flow rates. The ratio of maximum flow rate to minimum flow rate is generally above 20:1, suitable for a wide range of industrial pipe diameters, up to 3m. The output signal is linear with the measured flow rate, with high accuracy. It can measure the fluid flow rate of acids, alkalis, salt solutions, water, sewage, corrosive liquids, as well as mud, slurry, pulp, etc. with conductivity ≥ 5 μ s/cm.

Product Details

Split type anti-corrosion electromagnetic flowmeter

Main technical parameters of Anhui Puli electromagnetic flowmeter

◆Split type anti-corrosion electromagnetic flowmeterTechnical data of the whole machine and sensors

execution standard	JB/T9248-1999
Nominal Diameter	3. 6, 10, 15, 20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500 600, 700, 800, 900, 1000, 1200, 1400, 1600, 1800, 2000, 2200, 2400, 2600, 2800, 3000
high flow rate	15m/s
accuracy	± 0.5% of the indicated value (flow rate 0.8m/s); ± 4mm/s (flow velocity<0.8m/s)
Fluid conductivity	≥5uS/cm，
Nominal Pressure	1.6 MPa	1.6 MPa	1.0 MPa	0.6 MPa	6.3, 10 MPa, etc
	DN3～DN150	DN15～DN600	DN200～DN1000	DN700～DN3000	Special Orders
Lining material	Polytetrafluoroethylene, chloroprene rubber, polyurethane, perfluoroalkoxy (F46), mesh PFA, PO
ambient temperature	sensor	-25℃～+60℃
	Converter and integrated model	-10℃～+60℃
High fluid temperature	integrated type	70℃
	Separated type	Polychloroprene rubber lining		80℃; 120 ℃ (specify when ordering)
		Polyurethane lining		80℃
		PTFE lining		100℃; 150 ℃ (specify when ordering)
		Perfluoroethylene propylene (F46)
		Mesh PFA
Signal electrodes and Grounding electrode material	Stainless steel 0Cr18Ni12Mo2Ti, Hastelloy C, Hastelloy B, titanium, tantalum, platinum/iridium alloy, stainless steel coated with tungsten carbide
Electrode scraper mechanism	DN80～DN3000
Connecting flange material	carbon steel
Connecting ring material	Stainless steel 1Cr18Ni9Ti
shell protection	ND15-DN3000 separated rubber or polyurethane lined sensor			IP65 or IP68
	Integrated type (circular converter)			IP67
	Other sensors and separate converters			IP65
Explosion proof instrument Explosion proof mark	Ex deiaⅡCT4	IP65、DN15～DN600
Distance (separated type)	The standard length provided by the separated cable manufacturer is 10m, and the distance between the converter and the sensor is generally not more than 100m. If it exceeds 100m, special orders are required

Product selection code

a. Connection form

e. Electrode material

A flange connection
B clamping type

Stainless steel 0Cr18Ni12Mo2Ti
2 哈氏合金B
3 Hastelloy C
4 Titanium
5 Platinum/Iridium Alloy
6 Tantalum

b.公称通径(mm)

encoding	path	encoding	path	encoding	path
015	15	250	250	10A	1000
020	20	300	300	12A	1200
025	25	350	350	14A	1400
040	40	400	400	16A	1600
050	50	450	450	18A	1800
065	65	500	500	20A	2000
100	100	600	600	22A	2200
150	150	700	700	24A	2400
200	200	800	800	26A	2600
		900	900	28A	2800
				30A	3000

f. Shell protection

1 IP65
2 IP68+IP65 (with sensor IP68+converter IP65) (D code only available for 2, 3
4. 6; G code can only select 0; I-code can only select CR; K-code can only select 01-02)
3 IP67 (g code can only choose 0; I-code can only select CH; k-code can only select 03)

g. Explosion proof mark

0 None
Explosion proof, choose 1 for F-code and 02 or 03 for K-code;

h. Attachment

0 None
1. Grounding electrode (DN25~DN3000)
2 grounding rings (DN15~DN3000)
3-electrode scraper mechanism (DN80~DN3000)

c. Nominal pressure (MPa)

06	0.6	(DN700～DN3000)
10	1.0	(DN15～DN1000)
16	1.6	(DN15～DN600)
40	4.0	(DN15～DN150)
Xx special order

i. Structure

CR separation type
CH integrated type

j. Power supply

1 85～265V AC 45～400Hz
2 16～40V DC

d. Lining material

1. Polytetrafluoroethylene (F4) (DN15~DN1000) (not suitable for negative pressure)
2 Polychloroprene rubber (DN50-DN3000)
3 Polyurethane (DN15~DN600)
4. Perfluoroethylene propylene (F46) (DN10~DN250) (DN65 and above are suitable for negative pressure)
5 PFA (DN10~DN250) (DN65 and above are suitable for negative pressure)
6 PO (DN50～DN400)

k. Converter type

01 square separation type, single current, dual pulse, dual alarm
02 Circular Separation Type, Single Current, Single Pulse, Dual Alarm
03 Circular Integrated Type, Single Current, Single Pulse, Dual Alarm
04 square integrated type, single current, dual pulse, dual alarm
Note: 1. Communication protocol: RS232, RS485, HART optional
2. Batch control function is optional
3. GPRS remote monitoring function is optional

Note: The power-off recording function is optional