Siemens industrial computer

Siemens industrial computerIt is a sturdy and reliable rack mounted industrial computer, featuring a 19 inch standard 4U rack mounted design and equipped with an In Pentium Dual Core G2010 processor. It can ensure 24-hour full speed operation of the CPU under industrial conditions with ambient temperatures up to 40 º C. Configure two serial ports COM1 and COM2, where COM2 supports three modes (RS232/RS485/RS422) (selected through the BIOS menu), and two video output interfaces DVI-D and VGA can output simultaneously. SIMATIC IPC3000 SMART has a high cost performance ratio and can be widely used in fields such as metallurgy, electronics, general machinery, power, mining, and transportation.

6AG4010-5AA12-0XX5

Design a 19 inch (4U) rack mount

Installation methods support horizontal installation and tower installation

Intel Pentium Dual Core Processor G3260 (3.30GHz)
Chipset Intel H61
2GB DDR3-1600 memory, two DIMM slots for DDR3, expandable up to 16GB
Hard drive 500G, 3.5 "SATA, built-in
Operating System None
Expansion slots 4 PCI, 1 PCIe x 1 (2.0), 1 PCIe x 8 (2.0), 1 PCIe x 16 (2.0)
DVD-RW optical drive
Power supply 100-240 VAC, 50/60Hz, 350 W, wide range
Allow short-term power interruption up to 20 ms
Disk installation space 'internal one 3.5' 'front three 5.25' ''
Ethernet 2x 10/100/1000 Mbit/s (RJ 45)
USB 2.0 '2 located at the front end
4 located at the rear
2 serial ports (RS232)
VGA 1
DVI-D 1
Mouse/keyboard with 2 PS/2 interfaces
1 audio input, 1 audio output, 1 microphone

Siemens industrial computer