ST5484E vibration transmitter

NegotiableUpdate on 03/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The ST5484E vibration transmitter integrates a magneto electric vibration sensor and a precision measurement circuit to form a high-precision vibration measurement system. The transmitter can be directly connected to DCS, PLC, or other equipment, making it an ideal choice for measuring the vibration of factory equipment such as fans, motors, and pumps.

Product Details

1.ST5484E vibration transmitterIntegrating magneto electric vibration sensors and precision measurement circuits together to form a high-precision vibration measurement system, this transmitter can be directly connected to DCS, PLC or other equipment, making it an ideal choice for measuring the vibration of factory equipment such as fans, motors, water pumps, etc.

2．ST5484E vibration transmitterTechnical Specifications

2.1 Frequency response: 10-1000 Hz * or 5-1000 Hz (special instructions)

2.2 Natural frequency: 10Hz

2.3 Range: 0-20mm/s or 0-200um (customizable range)

2.4 Output current: 4-20mA

2.5 Output impedance: ≤ 500 Ω

2.6 Working voltage: DC12-24V ± 10%

2.7 Wiring method: 2-wire system

2.7 Maximum acceleration: 10g

2.8 Measurement direction: horizontal or vertical or universal,

3. Installation

3.1 Installation position: Install vertically or horizontally on the tested vibration point, fix the sensor bottom M10x1.5 screw on the tested housing, and then tighten the sensor on top.This transmitter can be directly connected to DCS, PLC or other equipment, making it an ideal choice for measuring the vibration of factory equipment such as fans, motors, pumps, etc.