MLV-9200 Vibration Sensor

NegotiableUpdate on 03/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The MLV-9200 vibration sensor is mainly installed on the bearing covers of various rotating mechanical devices, such as turbines, compressors, fans, and pumps. It is an electromagnetic sensor that outputs voltage by cutting magnetic field lines with a moving coil, and therefore has the characteristics of not requiring power supply during operation and easy installation.

Product Details

MLV-9200 Vibration Sensor

▲ Frequency response: 5Hz~1000Hz (-3db)

10Hz～1000Hz（－3db）

▲ Sensitivity:

20.0mv / mm s-1（500mV/inch/sec），±5 ％

(Measured at 80Hz and a speed of 10mm/s)

▲ Amplitude linearity:<3%

▲ Impact resistance: able to withstand acceleration peaks up to 50g

▲ Lateral sensitivity:<5%

▲ Working and operating temperature range:

-30 ℃ to+120 ℃

▲ Large measurable displacement: 1mm (single peak value)

▲ Output resistance: ≤ 1K Ω

▲ Insulation resistance:>2M Ω

▲ Environment: resistant to dust and moisture

▲ Relative humidity: 95% non condensing

MLV-9200 Vibration SensorMainly installed on bearing covers of various rotating mechanical devices (such as turbines, compressors, fans, and pumps). It is an electromagnetic sensor that outputs voltage by cutting magnetic field lines with a moving coil, and therefore has the characteristics of not requiring power supply during operation and easy installation.