-
E-mail
104579374@qq.com
-
Phone
15251525984
-
Address
No. 11, Longzhu Industrial Park, Huazhuang Town, Binhu District, Wuxi City
Product Categories
Wuxi Shuangrong Heat Exchange Equipment Co., Ltd
S-type radiator
NegotiableUpdate on 07/07
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
S-type radiator
Product Details
S-type steam heat dissipation pipe is a standard type of heat dissipation pipe suitable for steam heating systems. As its inlet and outlet joints are located on both sides of the pipe, curved pipes are used to eliminate stress caused by thermal expansion and other reasons.
The finned tubes are made by winding 10 × 0.2mm corrugated copper strips around a diameter of 16 × 1mm copper tube, forming a spiral shape. They have three different pitch sizes: 3.2mm'R ', 4.2mm -'M', and 6.5mm -'T. The 'R' pitch has a smaller pitch size but a larger heat dissipation area, resulting in a larger heat dissipation capacity. The 'M' pitch has a larger pitch size and lower heat dissipation and air resistance. The 'T' pitch has a larger pitch size and is suitable for situations with higher steam pressure but lower air temperature rise. Durable, easy to install, and cost-effective.
The S-type numbering method is: model number (spacing code) - surface tube number - surface tube length (inches). If two rows are used, with a spacing of 3.2mm, 21 surface tubes, and a tube length of 60 inches, then it is S-2 (R) -21-60. (
The finned tubes are made by winding 10 × 0.2mm corrugated copper strips around a diameter of 16 × 1mm copper tube, forming a spiral shape. They have three different pitch sizes: 3.2mm'R ', 4.2mm -'M', and 6.5mm -'T. The 'R' pitch has a smaller pitch size but a larger heat dissipation area, resulting in a larger heat dissipation capacity. The 'M' pitch has a larger pitch size and lower heat dissipation and air resistance. The 'T' pitch has a larger pitch size and is suitable for situations with higher steam pressure but lower air temperature rise. Durable, easy to install, and cost-effective.
The S-type numbering method is: model number (spacing code) - surface tube number - surface tube length (inches). If two rows are used, with a spacing of 3.2mm, 21 surface tubes, and a tube length of 60 inches, then it is S-2 (R) -21-60. (
