Remote transmission intelligent metal tube float flowmeter

NegotiableUpdate on 06/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Brief description: The intelligent remote transmission metal tube float flowmeter (also known as metal tube rotor flowmeter) is suitable for measuring the flow rate of small caliber and low flow rate media; Reliable work, minimal maintenance, and long lifespan; The metal tube float flowmeter does not have high requirements for the straight pipe section; A wider flow ratio of 10:1; Dual row large LCD display, optional on-site instantaneous/cumulative flow display, with backlight single axis sensitive indication; Non contact magnetic coupling transmission; Metal tube float flowmeter with all metal structure, suitable for high temperature, high pressure and highly corrosive media; Can be used in flammable and explosive hazardous environments; Optional two-wire system, battery, and AC power supply methods; Multi parameter calibration function.

Product Details

Intelligent remote transmission metal tube float flowmeter(also known as metal tube rotor flowmeter) is suitable for measuring the flow rate of small caliber and low velocity media; Reliable work, minimal maintenance, and long lifespan; The metal tube float flowmeter does not have high requirements for the straight pipe section Wide traffic ratio of 10:1; Dual row large LCD display, optional on-site instantaneous/cumulative flow display, can be equipped with backlight Single axis sensitivity instructions; Non contact magnetic coupling transmission; Metal tube float flowmeter with all metal structure, suitable for high temperature and high Pressure and strong corrosive media; Can be used in flammable and explosive hazardous environments; Optional two-wire system, battery, and AC power supply Formula; Multi parameter calibration function; The metal tube float flowmeter is equipped with data recovery, data backup, and power failure protection functions.

Intelligent remote transmission metal tube float flowmeterTechnical Parameter

Measurement range: Water (20)℃）1-200000 l／h
Air (20℃， 0．1013MPa）0．03－4000m3／h
Refer to the flow chart, special flow rates can be customized
Range ratio: Standard 10:1 Special type 20:1
Accuracy: Standard Type 1.5 Level Special Type 1.0 Level
Pressure rating: Standard type: DN15－DN50 4.0MPa DN80-DN200 1.6MPa
Special type: DN15－DN50 25MPa DN80-DN200 16MPa
The pressure rating of the jacket is 1.6MPa
The special type of metal tube float flowmeter should be negotiated with us before selection and ordering
Pressure loss: 7kPa-70kPa
Medium temperature: Standard type: -80℃-＋200℃：PTFE：0℃－85℃
High temperature type: up to 400℃
Medium viscosity: DN15:<5mPa. s (F15.1-F15.3)
<30mPa.s(F15.4-F15.8)
DN25: <250mPFa.s
DN50-DN150: <300mPa.s
Environmental temperature: LCD type -30℃－+85℃
Pointer type -40℃－+120℃
Connection form: Standard type: DIN2501 standard flange
Special type: Any standard flange or thread specified by the user
Cable interface: M20 * 1.5
Power supply: Standard 24VDC two-wire 4-20mA (10.8VDC-36VDC) ）
Communication type: 85-265VAC 50HZ
Battery type: 3 6V@4AH Ni-MH
Alarm output: upper or lower limit instantaneous flow alarm
Standard type: open collector output (maximum) 100mA@30VDC Internal impedance 100 European)
Special type: Relay output (maximum contact capacity) 5A@250VAC ）
Pulse output: Accumulated pulse output, with the smallest interval of 50 milliseconds
LCD display: instantaneous flow display value range: 0-50000
Accumulated traffic display value range: 0-
Protection level: IP65
Explosion proof mark: intrinsic safety type iaⅡCT6 Explosion proof type DⅡCT6

Intelligent remote transmission metal tube float flowmeterProduct Selection

code	Measurement tube structure
50	Down in, up out
51	Down in, up out horizontally
52	Bottom horizontal in and top horizontal out
53R	Right in, left out
53L	Left in and right out
	code	Liquid receiving material
	R0	0Cr18Ni2Mo2Ti
	R1	1Cr18Ni9Ti
	Rp	PTFE
	T1	Titanium alloy
	Rl	316L
		code	Pipeline diameter
		DN15	15
		DN25	25
		DN50	50
		DN80	80
		DN100	100
		DN150	150
		DN200	200
			code	Additional Structure
			not have
			T	Jacket type
			Z	Damping type
			G	High temperature type
			Y	High voltage type
				code	Indicator form code combination
				M1	Local indicator, mechanical indication of instantaneous flow rate
				M2	Power supply type, mechanical indication of instantaneous flow rate, LCD display of instantaneous/cumulative flow rate
				M3	Power supply type, no mechanical indication, LCD display instantaneous/cumulative flow rate
					code	Power supply mode
					not have	M1 indicator only
					A	220VAC, 4-20mA output
					B	Battery powered, no output
					C	24VDC， Two wire power supply, 4-20mA output
					D	24VDC， 3、 Four wire power supply, 4-20mA output
						code	Explosion proof mark
						l	Intrinsic safety iaCT5 square shell
						d	Explosion proof Diibt4 enclosure shell
							code	Alarm or pulse output
							not have	No alarm or pulse output
							K1	Upper limit alarm or one pulse output
							K2	Lower limit alarm or one pulse output
							K3	Upper and lower limit alarm or dual pulse output