Plastic film sample cutting machine

This machine is suitable for biaxially oriented thin films（BOPPTheBOPCTheBOPETTheBOPA）Preparation of test strips for tensile testing of uniaxial stretch films and their composite films (bags).

Compliant with standards:

comply withGB/T1040.3-2006/ISO527-3:1995Determination of Plastic Tensile Properties3Section: Sample Conditions for Thin Films and Sheets6.1.1The relevant regulations regarding spline size.

Instrument features:

The machine is beautiful and elegant, with stable clamping of plastic film samples, sharp cutting tools, and easy replacement; Easy to operate, safe and reliable to use; Multiple layers, multiple or multiple splines can be cut at once; Quantity of samples that can be prepared at once12Article, among which15mmwide5Article10mmwide7Article; In addition, users can change the tool configuration as needed and cut simultaneously at once10mmThe15mmThe20mmThe25mmFour types of splines.

Compared with the punching method, the cutting method of this machine produces samples with flat edges and parallel edges without defects (observed at a magnification ratio without defects), ensuring that the mechanical properties of the film are not affected. Its tensile strength and elongation at break data are accurate, reliable, and consistent.

Technical Specifications:

Sample width:10mm×7articleThe15mm×5Article

20mm×3articleThe25mm×3Article(Change blade installation method)

Sample preparation error:≤±0.1mm；

Sample length:230mm；

Cutting thickness:≤0.25mm；