Welcome Customer !

Membership

Help

Jiangsu Sanfeng Instrument Technology Co., Ltd
Custom manufacturer

Main Products:

intelligent-mfg>Products

Jiangsu Sanfeng Instrument Technology Co., Ltd

  • E-mail

    sfybkj@163.com

  • Phone

    18915199993

  • Address

    No. 8-6 Kejian Road, Dailou Industrial Park, Jinhu County, Jiangsu Province

Contact Now

Magnetic levitation ball level gauge manufacturer

NegotiableUpdate on 06/11
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

Brief description: The magnetic levitation ball level gauge manufacturer is a plug-in level instrument. Composed of a magnetic reed switch, precision resistor, and amplification conversion circuit. When the magnetic force of the magnetic float of the liquid level gauge acts on the reed switch at a certain position, the reed switch closes, causing the amplification and transformation circuit to output a current value corresponding to the measured liquid level. As the liquid level changes, the amplification and transformation circuit converts the liquid level into a linear 4-20mADC signal output to achieve the transmission or control of the liquid level signal.

Product Details

UQZMagnetic levitation ball level gauge manufacturerIt is a plug-in liquid level instrument. Composed of a magnetic reed switch, precision resistor, and amplification conversion circuit. When the magnetic force of the magnetic float of the liquid level gauge acts on the reed switch at a certain position, the reed switch closes, causing the amplification and transformation circuit to output a current value corresponding to the measured liquid level. As the liquid level changes, the amplification and transformation circuit converts the liquid level into a linear 4-20mADC signal output to achieve the transmission or control of the liquid level signal.

UQZMagnetic levitation ball level gauge manufacturerSuitable for measuring the liquid level of various media in industrial and civil buildings such as water towers, pools, water tanks, collection pits, and industrial tanks, widely used in departments such as liquid level, chemical, metallurgical, power, papermaking, food, and industrial wastewater treatment.

Technical parameters:

1. Measurement range L1: 300-6000mm;

2. Rated working pressure: ≤ 1.6MPa;

3. Material of liquid level gauge: 321, 304, 316, 316L;

4. Working temperature range: ≤ 80 ℃;

5. Connection flange: DN80~DN150;

6. Protection level: IP65;

7. Explosion proof grade: Exib Ⅱ CT5 (intrinsic safety);

8. Exd Ⅱ CT5 (explosion-proof);

9. Output current: 4-20mA;

10. Load resistance: 500 Ω;

11. Working power supply: 24V DC;

Characteristics:

1. Easy to install, after debugging before use, there is no need to debug again in the future;

2. Can perform interface measurements for two different density media;

3. It can effectively overcome the false liquid level formed by suspended solids, foam, etc;

4. The floating ball can measure the interface between two liquids through weighting;

5. High reliability, low cost, stable and reliable, with good repeatability.

Selection Table:

model

SF-UQZ
Instrument material

A

B

C

F4

Fp

Ordinary stainless steel

304 stainless steel

316 stainless steel

Stainless steel wrapped with PTFE

PP

Display mode

0

1

2

No header display

Digital header

LCD meter head

Installation method

L

T

Thread M20 * 1.5

Flange DN25

measuring range 300~6000mm
Working pressure ≤1.6MPa
operation temperature —40~+60℃
Medium density ≥0.7g/cm3

Product schematic diagram:

Figure 1 (Structure):

Figure 2 (Installation):