Localization of School Electronic Clock System

1Introduction to School Electronic Clock System

Localization of School Electronic Clock SystemIt is composed of a central master clock, multiple slave clocks, and monitoring software. Under normal system operation, the master clockGPSOr the Beidou satellite time signal continuously calibrates its internal clock accuracy through the transmission system (network485The bus sends precise time signals to sub clocks and other weak current system devices that require standard time signals in each area, achieving time synchronization of the entire network.

2、Localization of School Electronic Clock System(Digital Clock)Technical Specifications

Working voltage:AC220V±20%，50Hz±10%orPOEpower supply

Average power consumption:3W～30W(Determined by the size of the digital tube, single-sided and double-sided display, and display content)

Timing accuracy:≤1mS

Self travel time accuracy: ≤±0.05second/sky

LEDDisplay screen luminous intensity:≥200cd/m2

contrast≥10：1

LEDDisplay viewing angle≥±75°

MTBF：≥150000hour

Average repair time（MTTR）Generally not greater than30minute

The service life shall not be less than20Under normal usage conditions, no maintenance is required

3Reference standards for school electronic clock systems

Shanghai Ruicheng Electric Co., Ltd. strictly adheres to relevant standards and technical specifications in the development and production of sub clocks, and combines them with actual situations according toISO9001According to the requirements of the international quality certification system, corresponding enterprise standards and production processes should be formulated to better meet the requirements of users.

The design, manufacturing, testing, installation, debugging, and operation of the equipment comply with the current national and industry standards in China, including:

Code for Construction and Acceptance of Electrical Equipment Installation Engineering GB 50254-96

Analog quartz clock standard GB/T6046-1992

General Technical Conditions for Coating of Appearance Parts of Timing Instruments and Coating Layer of Clock Metal Appearance PartsZBY 11011-86

Equipment Reliability Test Specification GB50807-86

Electromagnetic compatibility testing and testing techniques GB/T17626-1998

Design Specification for Electronic Computer Room GB 50174-93

Design Specification for Integrated Cabling System Engineering GB 50311-2007

Code for Electrical Design of Civil Buildings JGJ/T 16-92

Design Specification for Digital Synchronous Network Engineering YD/T 5089-2005

Design Specification for Indoor Coverage Engineering of Wireless Communication Systems YD/T5120-2005

Protection against lightning electromagnetic impulse IEC61312-95

Industry Standards of the People's Republic of China QB—1038 1042—91

4Classification of School Electronic Clock Systems

Ethernet wired access to the central master clock orNTPThe time server obtains standard time, and this type of sub clock is referred to as network sub clock orNTPZi Zhong.

WIFIWireless access to the central master clock orNTPThe time server obtains standard time, which is abbreviated as this type of sub clockWIFIZi Zhong.

CDMA（4G）Wireless reception of signals from China Telecom base stations to obtain standard time, referred to as this type of sub clockCDMA（4G）Zi Zhong.

RS485The bus method obtains the standard time of the central master clock, which is abbreviated as this type of sub clock485Zi Zhong.

From the perspective of display content, sub clocks are divided into digital sub clocks and analog sub clocks.