Leak Test | Leakage Tester CETATEST 515

NegotiableUpdate on 01/28

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Leak Test | Leakage Tester CETATEST 515

Product Details

CETATEST 515 is a fully automatic leak detector used for detecting unsealed components during production cycle time, which can operate in three different modes.

The "Sealing Component High Resolution" mode can be used to detect test workpieces that cannot be inflated, hence it is called "Sealing Component". In this mode, small changes in the volume of the test workpiece can be detected (0,03ml<><>)

The "pressure reduction high speed" mode can be used for leak detection of small workpieces under high-speed production rhythm;

The "pressure rise" mode has high-quality measurement signals and components that serve as external measurement circuits (such as check valves and main pressure control).

Sensor type	Differential pressure sensor, gauge pressure sensor
measuring range	± 500 Pa, ± 5,000 Pa in 1 Pa-steps
Display units	Pa, hPa, psi, Pa/s, hPa/s, mbar*l/s, ml/min, ml/h, l/min, l/h, mmHg, Torr, mmWs
Pressure controller	Electronic (initial pressure), mechanical (intermediate pressure, type "boost")
Test pressure	-1,000 mbar, 200 mbar, 1000 mbar (Type "Boosting": High 10 bar)
Testing method	Pressure leakage measurement, high-resolution testing of sealed workpieces (option A), High speed pressure leakage test (option B), Boost test (indirect)
(option C)	size
345 mm x 145 mm x 435 mm (W x H x D)	classic case

Test micro exchangers, sensors, relays, valves, watches