L/S Easy-Load ® 3 Easy to Install Type 3 Pump Head

Place of OriginUnited States

No tools or installation accessories are required when installing and stacking pump heads - the pump tube is automatically positioned, making installation and replacement more convenient

■ Rotary lock installation, the entire installation and stacking process only takes a few seconds
Equipped with an installation panel, the Easy Load 3 pump head can be mounted to the L/S driver - the brake lever can fix the pump head during operation in any direction
Polypropylene (PP) shell, CRS or SS rotor - CRS rotor is more economical, SS rotor is more durable, and has better chemical resistance
■ Same side fluid inlet/outlet, very suitable for applications with limited operating space - can be installed in four directions (depending on the driver)
Stacked pump heads can improve transmission capacity and are suitable for multi-channel applications; Please refer to the specifications of each driver for the maximum number of pump heads that can be installed

The Easy Load 3 pump head adopts an automatic positioning mechanism design, making the installation and removal of pump pipes more convenient than ever before. Just open the pressure rod to open the bite bed, and at the same time, turn on the pump

The tube is fed into the pump tube locator and accurately positioned. Close the pressure rod and start the pump - the locator will automatically clamp the pump tube and firmly fix it.

Apply the optimal bite force to the bite bed, and a wider bite angle can prevent liquid backflow when the pump tube reaches the rated pressure (see specifications in the table below)

The rotor has a 30 ° roller/shaft offset adjustment function - it can unify the channels from the stacked pump head, greatly reducing pulsation.

Random equipment: installation panel/adapter suitable for L/S drive, one 43cm long silicone tube. The pump head can be directly installed onto the driver.

L/SEasy-Load®3cross-dressing3typepump headParameters and ordering guide