KY-9000SKY-9000S fully automatic sulfur content analyzer (19 digits)

KY-9000S fully automatic sulfur content analyzerapply toDetecting trace sulfur content in liquid samples, applied in petroleum, petrochemical, chemical, environmental protection and other fields.Fully comply with relevant regulationsASTM standard method, supporting connection with LIMS system, can generate open data formats, with stable and reliable performance, high analysis accuracy, good repeatability, wide linear range, easy operation, high work efficiency, automatic monitoring, remote maintenance and other characteristics.

The main features of KY-9000S fully automatic sulfur content analyzer are:

1. The instrument adopts the internationally popular USB port communication, standard 24 bit data acquisition, and the minimum detection signal is less than 1 microvolt.

2. Data can be stored, accessed, printed at will, and relevant problems can be solved based on on-site data files.

3. The main components of the instrument are made of original imported components, which have better overall performance than similar domestic instruments and can replace imported products.

4. The high voltage of the photomultiplier tube (PMT) can be adjusted arbitrarily, and the calibration of the standard curve can be done using single point or multi-point calibration, making it easy to operate.

5. The instrument has extremely high sensitivity, linearity, anti-interference ability, and accurate and reliable analysis results.

6. The software can run on all current operating systems and has strong adaptability. The instrument software has powerful functions.

KY-9000S Automatic Sulfur Content Analyzer Instrument Execution Standard:

SH/T 0689 Determination of Total Sulfur Content in Light Hydrocarbons, Engine Fuels, and Other Oil Products by UV Fluorescence Method

GBT 34100-2017 Determination of Total Sulfur Content in Light Hydrocarbons, Engine Fuels, and Other Oil Products by UV Fluorescence Method

GB/T35582 Sulfur and Nitrogen Element Analyzer

ASTM D5453 Standard Test Method for Total Sulfur Content of Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence Method

ASTM D6667 Test Method for Total Volatile Sulfur Content in Gaseous Hydrocarbons and Liquefied Petroleum Gas by Ultraviolet Fluorescence Measurement

ASTM D7183 Standard Test Method for Total Sulfur Content in Aromatic Hydrocarbons and Related Compounds by Ultraviolet Fluorescence Method

ISO 17198 Determination of total sulfur content using ultraviolet fluorescence method for dimethyl ether (DME) fuel

DB51/T 1689 Determination of Total Sulfur Content in Liquefied Natural Gas (LNG) by UV Fluorescence Method

GB/T11060.8 Determination of Sulfides in Natural Gas Part 8: Determination of Total Sulfur Content by UV Fluorescence Method

Main technical parameters of KY-9000S fully automatic sulfur content analyzer:

• Sample type: Liquid
• Measurement method: UV fluorescence method (S)
• Sample tray:19 people
• Waste liquid bottle position: 1
• Solvent bottle position: 2
• Injection volume: 0.1ul～250ul
• Measurement range: 01mg/L～20000mg/L
• Detection limit: 01mg/L
• Repeatability error: 1.0mg/l, ± 0.2 mg/l

1.0mg/l<X<100 mg/l,Cv≤10%

100mg/l<X<10000 mg/l, Cv≤5%

• Gas source requirement: high-purity oxygen: 99.99%The above high-purity argon gas: 99.99%Above
• Temperature control range: room temperature～1100℃
• Temperature control accuracy: ±2℃
• Power:1800W