KY-3000S fluorescence sulfur analyzer

KY-3000SFluorescence sulfur analyzerIt is a sulfur analyzer widely used to determine the total sulfur content in products such as finished oil, crude oil, distillate oil, petroleum gas, plastics, and petrochemical products.Compared with similar instruments at home and abroad, it has the characteristics of wide linear range, low detection limit, strong anti-interference ability, easy operation, stable and reliable results, high analysis accuracy, and good repeatability.KY-3000SFluorescence sulfur analyzerAt present, there are relatively advanced total sulfur analysis instruments in China.KY-3000SSpecialized quartz tube（number: ZL 2010 2 0242233.X）Specialized cracking electric furnace（number: ZL 2010 2 0242234.4）Obtained utility model certificate.KY-3000SFully upgrade the National V standard and improve accuracy.

instrumentcharacteristic:

v The instrument adopts the internationally popular USB port communication, standard 24 bit data acquisition, and the minimum detection signal is less than 1 microvolt.

v Data can be stored, accessed, printed at will, and relevant problems can be solved based on on-site data files.

v The main components of the instrument are made of original imported components, which have better overall performance than similar domestic instruments and can replace imported products.

v The high voltage of the photomultiplier tube (PMT) can be adjusted arbitrarily, and the calibration of the standard curve can be done using single point or multi-point calibration, making it easy to operate.

v The software can run on all current operating systems and has strong adaptability. The instrument software has powerful functions.

Instrument execution standard:

v SH/T 0689, ASTM D5453 Determination of Total Sulfur Content in Light Hydrocarbons, Engine Fuels, and Other Oil Products (Ultraviolet Fluorescence Method)

GB/T 34100-2017 Determination of Total Sulfur Content in Light Hydrocarbons, Engine Fuels, and Other Oil Products by UV Fluorescence Method

instrumentTechnical parameters:

v Sample types: liquid, solid, and gas (with corresponding injectors required)

v Measurement method: UV fluorescence method (S)

v Measurement range: 0.2mg/L~5000ppm~percentage content

v Detection limit: 0.2mg/L (sulfur element)

v Repetitive error: ① 0.2mg/L≤X＜1.0， ≤ ±0.1mg/L；

② 1.0mg/L≤X＜100mg/L， ≤ 10%；

③ 100mg/L≤X≤10000mg/L， ≤ 5%

v Gas source requirements: High purity oxygen: above 99.98% High purity argon: above 99.98%

v Temperature control range: room temperature~1300℃

Instrument system configuration:

v Normal configuration:Complete set (including computer, quartz tube, liquid sampler, etc.);

v Imported accessories: photomultiplier tube (Japan), data acquisition card (USA), membrane dryer (USA), filter (USA), UV lamp (USA), etc;

v Optional accessories: solid sampler, gas sampler, quartz tube cracking, and various standard samples.