How much does a 1000 meter hot spring submersible pump cost

How much does a 1000 meter hot spring submersible pump cost

The crew must work submerged in water. When using vertically, the well diameter and pump model should be matched when selecting the model. It is important to avoid using a small diameter pump for large diameter holes, as this is not conducive to the heat dissipation of the motor

Submersible motor cable length: 3m. If the user needs to extend the cable, they can call us in advance. The submersible motor is lubricated with clean water, and the motor chamber must be filled with clean water before use. (Note: It must be filled completely, otherwise it will reduce the service life of the motor) If the water is not added, the motor will quickly burn out.

Motor protection level: IPX8 geothermal submersible pump, high-temperature resistant geothermal submersible pump,

How much does a 1000 meter hot spring submersible pump costFeatures:

1. High temperature resistant rubber bearings have a long service life without deformation, smooth flow channels, and are not prone to scaling, making them particularly suitable for hot spring water intake;

2. Integrated precision casting impeller, without the possibility of impeller scattering due to high flow and high head caused by stamping impeller; Sand proof shaft seal effectively prevents fine sand infiltration and has a longer service life;

Scope of supply

Hot water submersible pump unit (including pump body and submersible motor), with a matching flange at the outlet and 8 14 × 60 bolts. Or configure the corresponding water outlet (convenient for users to insert hoses for installation) with 1 copy of the user maintenance manual, 1 copy of the certificate of conformity, 1 copy of the packing list, and wooden box packaging.

Feature:

High efficiency: Using efficient hydraulic models to design impellers saves operating costs. Small footprint: The motor and water pump are vertically connected, requiring only a small installation space. Built in check valve: A check valve is installed above the pump body to prevent the water pump from being impacted by water during power outages. Diverse combination methods: The components of the water pump can be flexibly assembled according to different flow and head requirements.

pollution-free:

The pump body and motor are both made of stainless steel material, which has good corrosion resistance and will not cause secondary pollution. Bottom noise: Due to the pump body being placed in water, the noise generated is very low. Wide range of water supply provided: GOOD ® We provide a series of stainless steel water pumps that can adapt to different voltages (380V/220V) and (50HZ/60HZ).

Flow range: 0.5-380 m ³/H, maximum motor rate of 185KW. Low installation cost: Stainless steel means that the water pump is lightweight, easy to transport, and has low assembly costs, greatly saving installation and maintenance costs. Bearings with sand filtering channels: All bearings are water lubricated, and the rectangular bearing channels allow sand particles to be discharged simultaneously with the extracted liquid. Inlet filter: The inlet filter can prevent particles and large particles exceeding the specified quantity from entering the pump body. NEMA standard: All submersible pumps comply with NEMA standards, and submersible motor drives are produced by world manufacturers. Material: Made entirely of stainless steel, the 316/316L material used is certified by the food industry, with a stainless steel thickness of over 4MM. Production process: using professional laser cutting and laser welding technology for production. Laser cutting ensures the accuracy of water pump use and installation, while laser welding ensures the corrosion resistance and fatigue resistance of welding points.

Operation, maintenance, and upkeep of deep well pump manufacturers

1. During the operation of the electric pump, it is necessary to regularly observe the current, voltmeter, and water flow rate, in order to ensure that the electric pump operates under rated conditions.

2. Use valves to adjust flow rate and head, and do not overload operation. If any of the following situations occur, the operation should be stopped immediately:

a、 Rated voltage and current exceeding the rated value:

b、 At rated head, the flow rate decreases significantly compared to normal conditions;

c、 Insulation resistance is less than 0.5 megohms;

e、 When the dynamic water level drops to the pump suction port:

d、 When electrical equipment and circuits do not comply with regulations;

f、 When there is a sudden sound or significant vibration in the electric pump:

g、 When the protection switch trips frequently.

3. It is necessary to regularly observe the instruments and check the electrical equipment. The insulation resistance of the motor should be measured every half month, and the resistance value should not be less than 0.5 megohms.

4. Conduct maintenance and protection once every 2500 hours of irrigation period, and replace damaged and vulnerable parts.

5. Lifting and loading/unloading of electric pumps:

Open the cable and disconnect the power supply;

Step by step, use installation tools to dismantle the water outlet pipe, gate valve, and bend pipe, and lift the pump with a clamp to remove the well cover. Then, use another set of clamps to clamp the next section of the water supply pipe, and in this order, dismantle and lift the slurry out of the well section by section. (During the lifting and dismantling process, if it is found to be stuck, it cannot be lifted forcefully. It should be lifted and unloaded safely by moving up, down, left, and right to overcome the stuck point.);

Remove the wire guard, filter screen, and cut the cable from the lead and three core cable or flat cable joint:

Take out the locking ring of the coupling, unscrew the fixing screw, remove the connecting screw for inspection, and separate the motor and water pump;

Release the motor and fill it with water: