High pressure fan for medical wastewater purification and aeration

NegotiableUpdate on 03/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The high-pressure fan for medical wastewater purification and aeration is a practical blower equipment that can be used in industries such as instruments, cement transportation, chemical engineering, and petrochemicals. It has the advantages of high volume utilization rate, high volume efficiency, compact structure, low noise, and small gas pulsation. The aeration fan of the full air aerobic tank has a wide range of applications, high technology and cost-effectiveness, and is a low-noise fan equipment. The biological tank fermentation aeration fan can be used for sewage treatment, exhaust, drying, backwashing, blowing and air supply, etc. It is easy to operate and maintain.

Product Details

High pressure fan for medical wastewater purification and aerationAlso known as compressed air aeration. The aeration tanks using this method are mostly rectangular concrete tanks, which are divided into several separate inlet compartments by partition walls, and each compartment is further divided into several corridors. After entering the pool, the sewage flows sequentially in the corridor and is discharged at the other end. Air is compressed by a vortex air pump and transported through pipelines to an air diffusion device located at the bottom of the pool, where it becomes bubbles that dissipate and dissolve oxygen into water at the gas-liquid interface. There are four different types of diffusion devices, including porous tubes, fixed spiral aerators, water jets, and microporous diffusion plates.

High pressure fan for medical wastewater purification and aerationconfiguration

(1. Shell material: The fan adoptsGao QiangDie cast aluminum is the same aluminum material as Mercedes Benz wheel rims. Compared to ordinary aluminum alloys, die cast aluminum is stronger and has a lighter weight effect compared to iron shell fans.

(2. Motor performance: The fan adopts a European style motor, which is a wideband, wide voltage motor. It is included in single-phase 110V/230V industrial three-phase: 220/380/415/660V, etc. The motor frequency can be adjusted from 45-75HZ, and the IP55 protection level is F-class insulation level. Its advantages are beyond the reach of general motor factories in China, and it is highly favored by domestic and foreign customers.).