High pressure aluminum alloy high-pressure fan for aeration treatment of sewage anaerobic tank

NegotiableUpdate on 03/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The high-pressure aluminum alloy high-pressure fan used for anaerobic tank aeration treatment in sewage treatment is mainly used to aerate the water to increase the oxygen content in the water, thereby removing iron, manganese, or promoting aerobic microorganisms to degrade organic matter, achieving the goal of removing oxidizable precipitates; In addition, aeration can allow sufficient contact between water and air to exchange gaseous substances and remove volatile substances from water, such as odor or harmful gases such as carbon dioxide and hydrogen sulfide; The bottom sediment can also be aerated by blowing air through the bottom air duct, and discharged through the wastewater pump, with various effects and purposes.

Product Details

High pressure aluminum alloy high-pressure fan for aeration treatment of sewage anaerobic tankWhen using aeration, a filter needs to be installed at the inlet to purify the air and prevent foreign objects from entering the fan and damaging the impeller. In sewage treatment systems, commonly used fans include but are not limited to high-pressure blowers, Roots blowers, rotary fans, etc. Generally, for small and medium-sized areas, high-pressure blowers are more commonly used, while for large areas, Roots blowers are more commonly used. Another advantage is that the high-pressure blower does not require maintenance or lubrication. So it saved the workers time. In terms of cost, it can save one-third or even half of the procurement cost.

High pressure aluminum alloy high-pressure fan for aeration treatment of sewage anaerobic tankalsoMainly used for sewage treatment, such as aeration and blowing in activated sludge process. It can also be widely used for conveying air or non-toxic, non corrosive gases on other devices, such as metallurgy, chemical industry, coal, power and other industries. Especially in small-scale blast furnace blowing, desulfurization blowing in power plants and refineries, tail gas induced draft, pressurized transportation of blast furnace and coke oven gas, air for coal preparation, and vacuum and material transportation for warehouse storage.

High pressure aluminum alloy high-pressure fan for aeration treatment of sewage anaerobic tankUsage detection method:

1. Check the fastening condition of each part and whether there is any looseness in the positioning pin
2. There is no oil leakage inside the blower body
3. There should be no scaling, rusting, or peeling inside the blower body
4. Pay attention to whether the lubrication and heat dissipation are normal, pay attention to the quality of the lubricating oil, regularly listen to the operation of the blower for any noise, pay attention to whether the unit is running under non compliant working conditions, and regularly add butter
5. The overload of the blower is sometimes not immediately displayed, so attention should be paid to the increasing trend of the intake and exhaust pressure, bearing temperature, and motor current to determine whether the machine is running normally
6. Before disassembling the machine, the dimensions of each fitting should be measured, recorded, and marked on the components to ensure that the original fitting requirements are maintained after assembly

Small water treatment aeration high-pressure blower