High current injection (BCI) testing system

NegotiableUpdate on 01/29

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The PBCI-100PB/C high current injection (BCI) testing system is an integrated conductivity sensitivity testing system according to the ISO11452-4 standard, which meets a series of standard requirements such as GB/T17626.6/ISO11452-4/National Military Standard GJB151B CS114. Built in signal source, power amplifier, and power meter.

Product Details

High current injection（BCI）Testing System
Product Model	PBCI-100PB	PBCI-100PC
meet the standard	ISO11452-4	GJB151B CS114
frequency range	100kHz～400MHz	4kHz～400MHz
Inject current	40-300mA (clamp injection)
Step by step method	Linear stepping (0.1-100MHz adjustable) Proportional step (0.2-10%)
output power	100W
current range	40mA～300mA
dwell time	Can be set from 0.5s to 60s
harmonic	≤-30 dBc/＜15dBc
output interface	N-type (female)
Power-on preheating	20 minutes
signal source(Built in)
Output frequency	4k-3GHz
output power	-120dBm～10dBm
Non modulated signal	Equal amplitude continuous wave
modulation mode	amplitude modulation frequency1Hz～100kHz Depth:1～100%		Pulse Modulation frequency1Hz～100kHz Duty cycle:1～100%
output interface	N (mother)
Power amplifier (built-in)
output frequency	100kHz～400MHz	4kHz～400MHz
Maximum output power	+44dBm/100W
Voltage Standing Wave Ratio	≤1.5
gain	maximum gain50dB/100W
VSWR	<1.5:1
output impedance	50Ω
output interface	N (mother)
Power meter (built-in)
test level	-70dBm～+15dBm
frequency range	4kHz～400MHz
Voltage Standing Wave Ratio	≤1.1
precision	±0.3dB
input interface	BNC(Mother)
Current injection clamp (with calibration component)PRM-ICC-40D
frequency range	4kHz～500MHz
Maximum input power	100W(Long term use)150W（15Minutes)200W（5Minutes)
Overall dimensions	outer diameter127mminner diameter40mmthickness80mm
Attenuator (injection clamp calibration component)
output impedance	50Ω
output power	100W
output frequency	DC-3GHz
Attenuation value and accuracy	3dBor6dB（±0.4）
Maximum standing wave ratio	1.1
load(Injection clamp calibration part)
output impedance	50Ω
output power	100W
output frequency	DC-3GHz
Current monitoring probePRM-CL-52M
frequency range	1KHz～500MHz
transfer impedanceZT(Ω)	0.1
transfer impedanceZT（dBΩ)	1
Insert impedance	1Ω
Maximum bias current	150A(DC-400Hz)
Maximum measured RF current	2A
Overall dimensions	outer diameter98mminner diameter40mmthickness38mm
satisfyCS114Artificial power networkLISN-50-2550doDCTest configuration2a
frequency range	0.1-110MHzUpgradeable to150MHz
Network load capacity	DC250V/50A
impedance	50Ω
size	185180390mm
satisfyISO11452-4Artificial power network parametersLISN-5-5080doDCTest configuration2a
frequency range	0.1-110MHzUpgradeable to150MHz
Network load capacity	DC500V/80A
impedance	50Ω
size	162172222mm
test environmentBCI-DESK
Test table (solid wood)	24001000800mm
Test reference plane (copper)	240010002mm
General Parameters
Instrument working status indication	front panelPCIndustrial control computer operation display
system	WIN system,canRandom storage test report
interface	USB
Equipment working power supply	AC220V ± 10%,50/60Hz (Chinese Mainland only)
fuse	3A
Maximum Power Consumption	200W
ambient temperature	15 ℃ -35 ℃
Pressure range	86KPa-106kpa
grounding resistance	Less than 0.5 Ω
host size	5U 450×550×222mm
weight	10kg