-
E-mail
2217414122@qq.com
-
Phone
13916256554
-
Address
Jiading District, Shanghai
Product Categories
Shanghai Hansi Electromechanical Co., Ltd
Hansi 5 kW gasoline generators
NegotiableUpdate on 02/17
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Hansi 5 kW gasoline generator $r $n gasoline generator incorrect operation: running with load without warming up after cold start - When the gasoline generator starts cold, due to the high viscosity and poor fluidity of the engine oil, the oil pump is not supplying enough oil, and the friction surface of the machine is poorly lubricated due to lack of oil, resulting in rapid wear and even cylinder pulling, tile burning and other faults. Therefore, after the gasoline engine is cooled down and started, it should be run at idle speed to heat up, and then run with load when the oil temperature reaches 40 ℃ or above
Product Details
Hansi 5 kW gasoline generators
Incorrect operation of gasoline generator: running with load without warming up after cold start-When the gasoline generator is started with a cold engine, due to the high viscosity and poor fluidity of the engine oil, the oil pump is not supplying enough oil, and the friction surface of the machine is poorly lubricated due to lack of oil, resulting in rapid wear and even cylinder pulling, tile burning and other faults. Therefore, after the gasoline engine is cooled down and started, it should idle and heat up until the oil temperature reachesOperate with load when the temperature is above 40 ℃; When starting the machine, it should shift to low gear and drive sequentially in each gear for a certain distance until the oil temperature is normal and the fuel supply is sufficient, then it can switch to normal driving. anotherIncorrect operation of gasoline generator: after cold start of gasoline engine, suddenly press the accelerator pedal-If the accelerator is suddenly pressed, the speed of the diesel gasoline generator will increase sharply, which will cause some friction surfaces on the engine to wear severely due to dry friction. In addition, when the accelerator is pressed, the force received by the piston, connecting rod, and crankshaft changes greatly, causing severe impact and easily damaging the components.
| Technical parameters of 5KW gasoline generator | ||
| model | HS6500DC | |
| generator | Rated power (KW) | 5 |
| Peak power (KW) | 5.5 | |
| Rated voltage (V) | 230/400 | |
| Rated current (A) | 23A | |
| phase number | Single phase/Three phase | |
| DC output (V/A) | 12V/8.3A | |
| Rated frequency (Hz) | 50 | |
| power factor | 1 | |
| Rated speed (rpm) | 3000 | |
| adjustment method | AVR (Automatic Adjustment) | |
| Continuous running time | 10H | |
| engine | Engine model | HS188F |
| engine type | Single cylinder, four stroke, overhead valve, forced air cooling | |
| Startup method | Backlash manual start/electric start | |
| ignition system | Transistor magnet ignition (contactless) | |
| Fuel volume (L) | 25 | |
| Lubricating oil volume (L) | 1.1 | |
| Fuel consumption rate (g/kw · h) | ≤365 | |
| engine power | 9.5KW | |
| insulation class | F | |
| displacement | 420cc | |
| Fuel model | 90 # or above unleaded gasoline | |
| Standard Configuration | Large fuel tank, large muffler, large air filter, non fuse circuit breaker | |
| Noise Db (A)（≤7m） | 72 | |
| size | Gross weight (kg) | 82/85 |
| Dimensions (mm) | 700×530×570 | |
| Accessories included in the unit | plug | 2 of them |
| sleeve | 1 piece | |
| Instruction Manual | 1 book | |
| Start key | 1 piece | |
| storage battery | 1 piece | |
| Mobile marine engine handle and parts | 1 set or optional | |
| other | brand | HANSI HANSI |
Hansi 5 kW gasoline generators
