German Fischer eddy current probe FTA3.3H

Product Description

Measure the thickness of non-conductive coatings on non-magnetic metal substrates (NC/NF). Very sensitive to moisture: not suitable for measuring on damp (acidic) surface dirt.

Application example:

Non magnetic metal substrate (NF)
Aluminum, copper or brass coatings, varnishes or plastic coatings (NC/NF)
The probe adopts conductivity compensation to obtain * *. Therefore, especially the different electrical conductivity of various aluminum alloys has no effect on the measurement of coating thickness

Use FTA3.3H probe to perform quality inspection on newly produced engine pistons.

Illustration
Probe model	FTA3.3H
Order number	604-142 (subject to change without prior notice)
Probe design	Axial single tip probe with spring-loaded measurement system Durable probe design with advanced wear-resistant probes
measuring method	Eddy current method
Measurement application	Iso/NF
measuring range	0 - 1200μm
accuracy	≤0.5μm：00 ... 1850μm ≤ 1% of nominal value:850 ... 1800μm ≤ 3% of nominal value: 800... 1200 μ m
Repetitive accuracy	00 ... 1100μm：≤ 0.4μm 100 ... 1200 μ m: ≤ 0.4% of the reading
Diameter/Width	18 mm
length	70 mm
Applicable models	FMP10/20/30/40/100,MMS ® PC & F-Modul PERMASCOPE ®
size