Data Collector X-Link

Application field
Surface water level, flow rate, and water quality monitoring
Groundwater level and quality
Water monitoring
Mining and Geotechnical Engineering
Weather monitoring and warning
Marine monitoring and early warning
Oil and gas industry
Other low-power remote data access systems

Technical Features
Software is convenient and easy to use
I/O and power connections use screw terminals for easy connection
The power supply adopts 8-16VDC power supply
Temperature compensated crystal oscillator (TCXO) real-time clock with backup battery (error ± 4ppm)
Built in solar panel regulator
Can connect up to 16 monitoring parameters, including:
 SDI-12 或 RS485 (shared as done in the Bubbler)
5 analog inputs: 2 single ended (0-5V), 2 differential (± 39mV, ± 21 mV)3mV, ± 2.5V), 1 4-20mA
2-channel digital input: used for tipping bucket rain gauge, frequency measurement, and switch status
Internal temperature monitoring
Battery voltage monitoring
Can average or accumulate the detection values
Lightning protection function for all external inputs
Custom calculation formula based on arbitrary measurements
Custom alarm function based on arbitrary measurements
2 LED confirmation/diagnostic indicator lights
Switchable power output
USB slave connects to PC via serial port (does not support external storage, modem, etc.)
Equipped with real-time clock and built-in lifetime battery
Intuitive programming using a graphical user interface (GUI) (see LinkComm)
Command line is used for regular programming
Individual operating parameters can be set for each measurement
Upgrade firmware via USB
Supports SDI-12, analog, 4-20mA input
Switchable power output/overload protection/digital output
Gas discharge tube protection for input port
Statistical function for maximum, minimum, and average measurement values
LED status indicator light