Corner support bearing KGLM, W300, igubal&# 174;

Corner support bearings KGLM, W300, igubal ®

Size series K, compliant with DIN ISO 12240 standard

Bearing seat material: igumid G

Ball material: iglidur ® W300

Deviation and edge load compensation

corrosion resistance

Excellent vibration damping performance

Good shock absorption

Suitable for rotation, swing, and axial motion

Corner support bearings KGLM, W300, igubal ®

igubal ® Corner support bearing

The use of corner supported bearings is often associated with heavy bearing materials, difficulty in installation, and high costs. Most of the time, long-term maintenance is required, and only specially designed bearings are corrosion-resistant. Due to high edge loads, or the need for re adjustment, re articulation, or re installation to compensate for alignment errors, roller bearings or sliding bearings often fail prematurely. igubal ® Angular bearings have put an end to all these drawbacks and opened up many new possibilities for your engineering design: they are easy to handle, cost-effective, lightweight, and durable.

The bearing seat is made of igumid G, a long fiber reinforced engineering plastic with high impact resistance. Suitable for long-term use at temperatures ranging from -30 ° C to+80 ° C.

In standard ball bearings, the balls are made of iglidur ® Made of W300 material, this material is known for its low friction coefficient and extremely low viscosity during dry operation. This is particularly important for low loads and very slow movements.

Deviation and edge load compensation

corrosion resistance

Excellent vibration damping performance

Good shock absorption

Suitable for rotation, swing, and axial motion

Typical application areas

food industry

Track technology

automotive industry

Equipment construction

There are more application areas here: industry solutions

Applicable occasions:

Suitable for high axial and radial loads

When simple installation is required

Under the narrow installation space

If chemical resistance is required

When high cost-effectiveness is required

If anti dirt bearings are needed

Adjust misalignment

Not applicable for:

If the temperature exceeds+80 ℃

If a diameter exceeding 30 millimeters is required

If a speed higher than 0.5 meters per second is required

Use our filter options to find suitable products

tolerance

Maintenance free igubal ® The inner diameter tolerance of the angular bearing is E10. The shaft tolerance should be between h6 and h9. The bearing clearance allows the bearing to expand due to temperature rise. Check the inner diameter

assembly

igubal ® The angular support bearing is fitted into the recommended H7 bearing seat hole and fixed axially. Due to the fact that corner bearings can automatically compensate for any deviation, there is no need to precisely adjust the bearing seat.