Conventional BPYJVP frequency conversion cable

Conventional BPYJVP frequency conversion cable, BPYJVP2 frequency converter cable

The structure of a frequency conversion cable includes three main insulated wires and three neutral insulated wires. An inner winding layer, a copper strip layer, an outer winding layer, and an outer sheath layer are sequentially set outside the main insulated wires and neutral insulated wires to form a 3+3 core structure, which makes the cable have strong voltage impact resistance and can withstand pulse voltage during high-speed and frequent frequency conversion, providing good protection for frequency conversion electrical appliances

000011.1.1Routine tests
　 The test conducted by the manufacturer on all manufactured lengths of the finished cable to verify whether all cables meet the specified requirements.
3.3. 2 Sampling tests
A test conducted by the manufacturer at a specified frequency on finished cable samples or on certain components taken from finished cables to verify whether the cable meets the specified requirements.
3.3. 3 Type tests
A test conducted on a type of cable included in this specification prior to supply, in accordance with general commercial principles, to demonstrate that the cable has the ability to meetGood performance under expected usage conditions. The characteristic of this experiment is that unless there are changes in cable material, design, or manufacturing process that may alter the characteristics of the cable, there is no need to redo the experiment after it has been conducted.

000011　Usage characteristics

000011.1　Rated voltage: U₀/U is: 450/750V, 0.6/1kV.

000011.2　High rated operating temperature of cable conductor: 18 ° C during normal operation0℃；Short circuit（Lasts for 5 seconds）Time: 350℃。

000011.3　Allowable bending radius of cable

——The cable without armor layer should not be smaller than the outer diameter of the cable6Double;

——Cables with armor or shielding structures should not be smaller than the outer diameter of the cable12times

Example:

（1）Copper core silicone rubber insulated silicone rubber sheathed control cable, for fixed installation, rated voltage450/750V19 cores1.5 mm²There is green/Yellow two-color insulated wire core, represented as:

第1Conductor like structures:KGG-450/750V 18×1.5+1×1.5 TICW/05-2009

第2Conductor like structures:KGG-450/750V 18×1.5(B)+1×1.5（B）TICW/05-2009

(2) Copper core silicone rubber insulated silicone rubber sheathed copper tape shielded control cable, for fixed installation, in accordance with the regulations1Class conductor structure, rated voltage 0.6/1kV19 cores1.5mm²Copper tape shielding, no green/Yellow two-color insulated wire core, represented as:

KGGP2-0.6/1kV19×1.5 TICW/05-2009

(3) Silicone rubber insulated silicone rubber sheathed braided shielded control flexible cable, for mobile installation, rated voltage450/750V19 cores1.5mm²Woven shielding, no green/Yellow two-color insulated wire core, represented as:

KGGRP-450/750V 19×1.5 TICW/05-2009

(4) Copper core silicone rubber insulated silicone rubber inner sleeve copper tape shielded steel tape armored silicone rubber sheathed control cable, for fixed laying, in accordance with the regulations1Class conductor structure, rated voltage450/750V19 cores1.5mm²Steel belt armor, no green/Yellow two-color insulated wire core, represented as:

KGGP2-2G-450/750V 19×1.5 TICW/05-2009

Conventional BPYJVP frequency conversion cable, BPYJVP2 frequency converter cableSold to:Beijing, Shanghai, Tianjin, Chongqing Hebei, Shanxi, Shaanxi, Shandong, Henan, Liaoning, Jilin, Heilongjiang, Jiangsu Zhejiang, Anhui, Jiangxi, Fujian, Hubei, Hunan, Sichuan, Guizhou, Yunnan, Guangdong, Hainan, Gansu, Qinghai、Inner Mongolia, Xinjiang, Xizang, Guangxi, Ningxia

AHTKJTGFYXGSXSCXLW20180913