Constant temperature high and low temperature circulating pump

NegotiableUpdate on 04/24

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The TCU constant temperature high and low temperature circulating pump is a magnetic driven ultra-high temperature vortex pump, which transfers circulating media such as liquids without particles or fibers (water, thermal oil, ethylene glycol). The pump has a beautiful appearance, low vibration, and low noise. It is suitable for circulating high-temperature heat transfer oil up to 350 ℃ and hot water up to 180 ℃. 2. Application areas: TCU temperature control, high and low temperature detection equipment, reactor insulation, chemical equipment and other industries.

Product Details

TCU constant temperature high and low temperature circulating pumpPuwei is a magnetic driven ultra-high temperature vortex pump that transfers circulating media such as liquids without particles or fibers (water, thermal oil, ethylene glycol). The pump has a beautiful appearance, low vibration, and low noise. It is suitable for circulating high-temperature heat transfer oil up to 350 ℃ and hot water up to 180 ℃.
Application fields:
TCU temperature control, high and low temperature detection equipment, reactor insulation, chemical equipment and other industries.

Application fields:

Any gas-liquid mixture, in addition to air, can also be used for gas-liquid mixing of other gases such as oxygen, ozone gas, carbonization gas, etc; Solid liquid separation, petroleum refining, chemical engineering, high-pressure chemical engineering, leak free transportation of flammable, explosive, toxic and other dangerous liquids, valuable liquids, refrigerants or high-temperature liquids, low viscosity liquids, corrosive liquids, and liquids that operate under harsh conditions and contain gases, as well as the transportation of easily vaporized liquids such as liquefied gas and liquid ammonia; Industries such as precision ultra-high temperature mold temperature machines, reactor insulation, and high and low temperature detection equipment.

Structural characteristics:

1. The heat transfer oil circulation pump is the second generation product developed by our unit based on the digestion and absorption of foreign oil pumps. The basic structural form is a single-stage single suction cantilever foot support structure. The pump is designed for axial suction, and the outlet is vertically upward from the center. It is installed on the base together with the motor.

2. This product is supported by a double ended ball bearing structure, with the front end lubricated with lubricating oil and the rear end lubricated with grease. There is a guide oil pipe in the middle for observing the sealing condition and recovering the heat transfer oil at any time.

3. The product adopts a self heating heat dissipation structure, which changes the traditional water cooling structure, making the structure simple, small in size, saving operating costs, good in performance, and reliable in use.