Color printing composite film curing room

Color printing composite film curing roomIt is usually composed of a circulation system, a heating system, and an over temperature exhaust system. The circulation system, over temperature exhaust system, heating system, and supporting air duct system use circulating fans and supporting air ducts for circulation, ensuring uniform temperature in the testing area. The heating system uses electric heaters, which are placed in the circulating air duct on the top of the maturation room and surrounded by fire-resistant and heat-insulating materials. Using PID temperature module control, the power of the heater is automatically adjusted according to the fluctuation of indoor temperature when the temperature reaches the required temperature of the product, in conjunction with the insulation performance of the insulation board, to accurately stabilize the temperature in the curing room at the set temperature value. The room temperature can be increased to the set degree within a certain time. When the temperature rises to the set value, the heater stops heating The heater has an overheat protection device. Use a low-noise fan to exhaust air and cycle temperature control process: When the machine is turned on, the heater starts heating and stops heating when the temperature reaches the set value. During the maturation process of the product in the maturation room, the cycle state is maintained to ensure temperature balance. The entire system has the characteristics of stable performance, precise control, small temperature fluctuations, high balance, and low noise.

aging roomPurpose:

The main process is to fully react the main adhesive (polyurethane) and curing agent of the composite film within a certain time and temperature range, to achieve a composite state, remove low boiling point residual solvents, and improve product quality.

aging roomPrinciple:

The curing process is mainly achieved by controlling the curing temperature and time to meet the quality requirements of the product. The temperature and duration of the time are mainly determined by the performance of the adhesive and the final performance requirements of the product. The temperature is too low, the time is too long, and the adhesive reaction is extremely slow; If the temperature is too high, the additive in the substrate film will precipitate, affecting the quality of the composite film and potentially increasing the odor (mainly caused by the precipitation of processing aids in the polyethylene film).

The curing process is mainly achieved by controlling the curing temperature and time to meet the quality requirements of the product. The temperature and duration of the time are mainly determined by the performance of the adhesive and the final performance requirements of the product. The temperature is too low, the time is too long, and the adhesive reaction is extremely slow; If the temperature is too high, the additive in the substrate film will precipitate, affecting the quality of the composite film and potentially increasing the odor (mainly caused by the precipitation of processing aids in the polyethylene film).

Color printing composite film curing roomPerformance and features:

1. Uniform heating, PID intelligent control for temperature regulation, high precision. No need for dedicated supervision, reducing operating costs.

2. Closed loop circulation of heat, minimal heat loss, and no pollution.

3. The heat source is mainly electric energy, and it is a composite film curing equipment that is durable and long-lasting!

4. Product specifications and configuration parameters are customized according to user needs.

5. Suitable for plastic color printing industry and packaging printing enterprises.

Product Description: How to Translate

1. Adopting a framework structure, it consists of a box, heating system, heat dissipation system, control system, etc. Flame retardant insulation board is added inside and outside, and the heating tube is made of stainless steel material. Better heating and insulation effects, stable and reliable operation!

2. The rolling track is made of thickened galvanized sheet metal.

Due to the different technical characteristics and methods adopted by various manufacturers, McBosComposite film curing roomThe noise treatment adopts high-quality circulating fans with low decibels, and the air ducts are wrapped in 10mm thick fireproof insulation cotton, which not only provides insulation but also reduces noise, with low cost and mature technology.