Circuit board for magnetic encoder

NegotiableUpdate on 01/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Magnetic encoder circuit board parameters $n outer diameter 43mm $n inner diameter 10mm $n height 6 $n light inertia, high reliability $n gap: 1.28 $n detection method: SENSOR $n base material: EPOXY GLASS $n temperature: '-10-85'C

Product Details

Circuit board for magnetic encoderparameter

Outer diameter 43mm

Inner diameter 10mm

Height 6

Light inertia, high reliability

Gap: 1.28

Detection method: SENSOR

Base material: EPOXY GLASS

Temperature: '-10-85'C

Electrical specifications for circuit boards used in magnetic encoders

output method	Collector open circuit	U-V-W phase	Bis-C	Continuous wave and OCW output	Line driver
input power	DC+5 [V] ripple p-p: below 5%	DC+5 [V] ripple p-p: below 5%	DC+5 [V] ripple p-p: below 5%	DC+5 [V] ripple p-p: below 5%	DC+5 [V] ripple p-p: below 5%
Current consumption (without load)	Maximum 70mA	Maximum 150mA	Maximum 150mA	Maximum 150mA	Maximum 150mA
Maximum response frequency	150 kHz (10~2048 peaks/rev)/300 kHz (2500~3600 peaks/rev)
output voltage	U below 0.5 [V]/ú 2.5 [V] or above (+5 [V] input), ú 10 [V] or above (+15 [V] input), V 18 [V] or above (+24 [V] input)
output current	Below 20mA	Below 20mA	Below 20mA	Below 20mA	Below 20mA
Rise and fall time	Below 3us	Below 3us	0.1us 以下 (5[W])	0.1us 以下 (5[W])	0.1us 以下 (5[W])
Joint terms	Output cable length 1 [M, responsible for impedance below 1 [k0]

Sensor spec

Using IC	IC-豪斯 MU- 150
Main track pole width	1.50 millimeters
tape	Every 2 tracks
The largest position	20 people
Elastic counting	1~65535 cardiopulmonary resuscitation
polar pair	16,32，64
Amphetamine	including
weight	150g

Environmental Characteristics Rigid spec

Operating temperature	-10℃~+70C
storage temperature	-20℃~+85℃
humidity usage	35%~85% relative humidity
Save humidity	30%~90% relative humidity
Vibration resistance	5G
impact resistance	50G
Protection structure	Protection level 50

Company Profile: Established based on its parent company SCMI, it started producing incremental magnetic encoders in 2020 and has successfully developed and manufactured detection systems using magnetic encoders.

By utilizing the vast technological capabilities and rich experience of the automation industry, we can provide high-quality solutions for various needs. Based on our charging and testing systems, we provide manufacturing equipment for South Korea and Asia.

In addition, we also have flexibility in design and production, and have the technology to quickly provide products that meet customer needs.

The design and production of encoder products comply with RoHS and CE standards, as demonstrated by Green, striving to build an environmentally friendly enterprise.

The company currently has three major divisions: Automation Equipment Division, Magnetization and Testing Equipment Division, and Encoder Manufacturing Division

Precision Linear Servo Motor Modules

Independently processed and produced, through encoder modules, we provide precise low-end modules for transfer. We can also customize products according to customer requirements to ensure product diversity

Rotary, Linear Encoder Modules

The magnetic incremental rotary encoder module is independently developed, processed, and produced by our company. Through ultra precision magnetization technology, we have produced high-quality, high angle resolution encoders up to 20BIT

All employees of our company follow the quality policy of "making all people my customers with good products", and provide accurate products with technology and quality

D43 (Axial Magnetic Sensor Circuit Board)