Bar Technology Gate

NegotiableUpdate on 03/10

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The bar technology door made by Tianqi includes a door frame, a movable door, a fixed door, and a server cabinet. The movable door and the fixed door are located in the middle of the door frame, and the server cabinet is located at the upper end of the door frame. The lower part of the server cabinet is connected to the upper part of the movable door according to a bracket. The inner end of the movable door is dragged and coordinated with the door frame according to the guide groove on the door frame. Its characteristics depend on the above server cabinet. Each side above the server cabinet is equipped with an electric motor and a driven wheel. The electric motor is equipped with a driven wheel, and the driven wheel and the driven wheel are connected according to a; A sliding rail with a parallel plane layout between the two is set directly below the synchronous belt, and a sliding rail slider is set on the sliding rail

Product Details

This one made by TianqiBar Technology GateIncludes door frame, mobile door, fixed door, and server cabinet,Mobile doors and fixed doors are located in the middle of the door frame,The server cabinet is located at the upper end of the door frame,Connect a bracket below the server cabinet to the top of the mobile door,Move the inner end of the door according to the guide groove on the door frame and drag it to cooperate with the door frame,Its characteristics depend on,Above the server cabinet mentioned above, electric motors and drive wheels are respectively installed on both sides,Install a driving wheel on the electric motor,The driving wheel and the driven wheel are connected according to the synchronous belt;A sliding rail with a parallel plane layout between the two is set up directly below the synchronous belt,Set up guide rail slider on the slide rail,The slider of the guide rail and the drag of the guide rail cooperate with each other;Above the guide rail slider, the transmission system rod is connected to the synchronous belt,The lower part is fixedly connected to the bracket.

IRFP350	400V	16A	180W	*	*	NMOSfield effect
IRFP340	400V	10A	150W	*	*	NMOSfield effect
IRFP250	200V	33A	180W	*	*	NMOSfield effect
2SD1847	50V	1A	1W	*	*	NPN(Low noise)
2SD1762	60V	3A	25W	*	90MHZ	NPN
2SD1718	180V	15A	3.2W	*	20MHZ	NPN
2SD1640	120V	2A	1.2W	4000-40000	*	NPN(Darlington)
2SD1590	150V	8A	25W	15000	*	NPN(Darlington)
IRFP240	200V	19A	150W	*	*	NMOSfield effect
IRFP150	100V	40A	180W	*	*	NMOSfield effect
2SD1975	180V	15A	150W	*	*	NPN
2SD1930	100V	2A	1.2W	1000	*	NPN(Darlington)

1Go directly to the manufacturer to visit the production process, quality, shipment volume, etc., to see the number of machines and equipment in the manufacturer's production workshop, operational capacity, and standardization of the production process. Determine your ownBar Technology GateWe can deliver on schedule without worrying about middlemen raising prices or extending delivery time.

2Generally speaking, technology doors with relatively low quality control will have low quotes and poor quality, mainly due to their lower costs, which not only affect the appearance of the locker but also its use. So when encountering manufacturers with relatively low prices, don't be too greedy for cheap prices and rush to choose. It's better to carefully examine and see if they are reliable.

3When choosing a manufacturer, it is important to communicate with them about specific delivery times, methods, costs, and other related issues. Generally speaking, good technology door manufacturers have done relatively well in these aspects, so we don't need to spend too much effort.