Baode Conductivity Sensor

NegotiableUpdate on 02/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Burkert8221 Baode Conductivity Sensor $n Sanitary Conductivity Probe 8221 can be widely used for conductivity measurement of various pure or concentrated liquids. Due to its hygienic and sturdy structure, this type of conductivity probe is suitable for the food and pharmaceutical industries, as well as the biotechnology and chemical industries. The conductivity probe is based on two different technologies: • The probe using the dual electrode structure principle is suitable for measuring pure liquids, especially pure water. Pollution can affect measurements.

Product Details

Baode Conductivity Sensor

The hygienic conductivity probe 8221 can be widely used for measuring the conductivity of various pure or concentrated liquids. Due to its hygienic and sturdy structure, this type of conductivity probe is suitable for the food and pharmaceutical industries, as well as the biotechnology and chemical industries. The conductivity probe is based on two different technologies: • The probe using the dual electrode structure principle is suitable for measuring pure liquids, especially pure water. Pollution can affect measurements. The probe using the four electrode structure principle can prevent polarization effects and thus be resistant to pollution. In this way, excellent linearity can be ensured throughout the entire range. All versions are integrated with a temperature sensor (Pt1000). The probe must be connected to the 8619 multiCELL transmitter/controller.

Burkert8221 Baode Conductivity Sensor

*Suitable for high demand applications in the healthcare industry (CIP and SIP compatible)

By providing different types of products, the range of conductivity can be expanded

Due to the support for several important process connectors, it is possible to personalize and meet customer needs

*Match our 8619 multifunctional transmitter/controller

Installation and maintenance of Baode conductivity sensor

Installation key points

Avoid bubbles: Flow sensors need to ensure that the solution is filled in the flow channel to prevent bubbles from interfering with the measurement.

Vertical installation: Immersion sensors are recommended to be installed vertically to reduce sediment adhesion.

Stay away from interference sources: Avoid installing close to strong electromagnetic field equipment (such as frequency converters).

routine maintenance

Cleaning the electrode: Wipe the surface of the electrode with deionized water or a soft cloth to avoid scratches (the surface of the platinum electrode should be kept smooth).

Calibration cycle: It is recommended to calibrate every 3-6 months using standard solutions (such as 1413 μ S/cm, 12.88 mS/cm).

Storage conditions: When not in use for a long time, the electrode should be soaked in a protective solution (such as 3 mol/L KCl) to prevent drying and failure.

Common troubleshooting

Unstable reading: Check if the electrode is contaminated or if the solution flows evenly.

Zero drift: recalibrate the zero point (using high-purity water or air calibration).

Slow response: It may be due to electrode aging and the sensor needs to be replaced.