Automatic kinematic viscometer

Automatic kinematic viscometer

● General characteristics:
1) Compliant with ASTM D445 and D446 standards;
2) High speed and high precision; Ultra precision meniscus detection;
3) Automatic flow time measurement; Automatic drying and cleaning;
4) Optional single or dual channel solvent injection system; Optional printer;
5) Fast water bath and sample heating;
6) Only the sample quantity (0.3-0.4 ml) is required; Can save 90% of cleaning and drying reagents;
7) Easy to use, high reliability, and good repeatability;
8) Removing the viscosity tube is very convenient; The viscosity tube can be cleaned separately;
9) The S-flow kinematic viscometer has the advantages of higher speed and lower capacity compared to traditional methods. Although traditional viscosity tests such as Ubbelohde and Cannon Fenske are reliable, they have some drawbacks, such as: A) requiring a large amount of sample and cleaning/drying reagents; B) Due to the large sample size, it is very difficult to completely clean and dry the viscosity tube; C) The testing cycle usually takes a long time; Therefore, on the production line, when there are a large number of samples that need to be measured and feedback on the production process product information in a timely and rapid manner every day, difficulties will arise; The S-flow kinematic viscometer effectively solves this problem. Due to the small capacity of the viscosity tube, the required sample volume and cleaning/drying reagents are relatively small, which can save costs, ensure complete cleaning and drying of the viscosity tube, and quickly heat up the sample. Can save up to 90% of cleaning and drying reagents compared to traditional viscosity tubes;
10) Unique viscosity tube design: The shape and size of the S-flow viscosity tube have undergone some changes, eliminating the interference of turbulence on the laminar flow. This viscosity tube is used to measure transparent and opaque liquids (Newtonian fluids), fully meeting or exceeding relevant international standards such as ASTM, IP, ISO, NEN, DIN, etc. The designed flow time is 30 seconds or more, and the range of kinematic viscosity is 1-3000 mm2/s. High viscosity measurement range can also be provided;
11) Automatic integrated design