Artificial intraocular lens optical eccentricity tester

As one of the existing functions of the IOL-IMAGER imaging measurement instrument, the brief introduction here is the same as the IOL-IMAGER imaging measurement instrument * and is only for online promotion purposes. Please forgive us!

• The measurement principle of the artificial lens optical eccentricity tester is to place the artificial lens in a fixture with a prescription diameter (10 or 11mm) and measure the offset distance between the geometric center of its optical body and the center of the fixture hole seat.
• The optical eccentricity measurement function of artificial intraocular lens is already included in IM-3 and does not need to be purchased separately.

Artificial intraocular lens imaging measurement instrument IM-3Measurable and Observable:

• Measurable physical properties specified in ISO11979-3 or YY0290.3: axial displacement, optical eccentricity, optical tilt angle (measurable in four directions), contact angle
• Measurable: Lens diameter, outer contour, loop diameter, length, and angle, etc
• Observable: Lens surface quality, defects, knife marks, edge burrs, etc

Artificial intraocular lens imaging measurement instrument IM-3Product advantages:

• One instrument can perform both frontal and lateral measurements.
• XYZ three-axis can move quickly, Z-axis can be fine tuned.
• Provide four independently controlled directional lighting modes: front lighting, back lighting, side lighting, and diagonal lighting.
• The entire measurement process is carried out in a constant temperature water bath, simulating the human eye environment.
• High definition cameras and optical paths provide high-quality images.
• Powerful software provides various measurement and export functions.

Host specification parameters:

• Size: Width 330mm, Depth 230mm, Height 515mm
• Weight: Approximately 11Kg
• Output: USB3.0-B
• Mobile range:

X-axis (left-right movement): 60mm

Y-axis (forward and backward movement): 50mm

Z-axis (up and down focus): 55mm+10mm fine adjustment

Temperature control/Specification parameters of light source control box:

• model: TC-35-IM
• Size: Width 150mm, Depth 235mm, Height 120mm
• Weight: Approximately 1.8kg
• Input: 220VAC 2A
• Output (large): 5V-1000mA, 0~12V-800mA, 24V-2500mA
• Positive lighting: one level adjustable
• Side lighting: adjustable in two levels
• Backlight: Two adjustable levels
• Slant lighting: one fixed level
• Temperature display resolution: 0.1 ℃

Optical parameters:

• Sensor size: 1/2.5 CMOS (5.76 * 4.29mm)
• Resolution: 5 million pixels (2592 * 1944)
• Pixel size: 2.2um * 2.2um
• Shutter: Electronic Rolling Shutter
• Sensitivity: 1.76V/lux-sec 550nm
• Object distance: 110mm
• Field of view: approximately 19.2mm x 14.4mm
• Optical magnification: 0.3X
• Display magnification: Depending on the monitor (approximately 38 times for a 1:1 22 inch display and 109 times for enlargement)
• Positive lighting: white coaxial downward illumination, adjustable brightness
• Side lighting: white LED soft light board, adjustable angle from 0 to 90 degrees, brightness adjustable and switchable
• Back lighting: white LED soft light board, adjustable brightness and switchable
• Slant lighting: white LED spotlight, adjustable angle at will

Measurement slots and fixtures:

• Heating method: Ceramic heating
• Heating power: up to 60W
• Medium used: water or salt solution
• Fixture categories: standard fixtures, circular quick fixtures, bidirectional fixtures, square quick fixtures, a total of 7 in four types
• Fixture clamping: stroke of 13mm, resolution of 0.001mm, full cycle repeatability accuracy better than 0.02mm

Measurement software parameters:

• Measurement functions: distance, angle, trajectory, area, radius, perimeter
• Image processing: brightness, contrast, sharpness, color, negative film, rotation, flipping, straightening
• Image scaling: 1%~800%
• The measurement results can be exported as an Excel file
• Repeated measurements can be analyzed and statistically analyzed
• Default measurement resolution: 0.001mm