50L Double Planetary Blender and Supporting Equipment - Pressing Machine

NegotiableUpdate on 01/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

coating

Product Details

Product Introduction:
SSX-50LPlanetary stirring is used for dispersion and mixing of solid-liquid and liquid-liquid phases; Due to its extremely high output torque, it is particularly suitable for products with high viscosity, such as adhesives, polyurethane, silicone, silver aluminum paste, and so on.

working principle:

After the barrel wall is precision processed by a large vertical lathe, it is then polished by a large automatic polishing machine to ensure that the movable scraper on the planetary carrier completely scrapes off the material on the barrel wall during rotation, leaving no residual material on the barrel wall and improving the mixing effect. Customizable vacuum type allows materials to be stirred under vacuum to achieve defoaming function, and can also be fed under vacuum, which not only reduces material loss but also ensures the hygiene of the feed. The stirring blades inside the bucket simultaneously rotate and self rotate, allowing the materials to be mixed extremely evenly and greatly improving efficiency compared to ordinary mixers.

Heating, cooling, and constant temperature control can also be carried out according to the temperature requirements during stirring.

Main technical parameters:

1-1 Product Name and Specification Model	A、 Planetary mixer; B、 Specification and model: SSX-50
1-2 Basic Structure	A、 Electric pot body lifting type; B、 Single direct material temperature measurement mode; C、 Disperse shaft+double mixing shaft+scraping wall+material press -.
1-3 buckets (mixing bucket)	A、 Capacity: 50L;
1-3 buckets (mixing bucket)	A、 texture of material: SUS304； double-deck B、 Mirror polishing ensures good roundness; C、 The flange plane on the mixing drum is matched with the flange on the upper drum body; D、 Each planetary mixer comes with two matching mixing buckets
Pure jacket direct cooling/heating type	The inlet and outlet ports are G1/2 ", and the jacket can be used to cool or heat the processed material with cold water (oil) or hot water (oil). (The design limit heating temperature is 150 ℃)
1-4 Upper bucket body (kettle lid)	A、 Material Science: SUS304。 B、 A powder/liquid feeding hopper that can be quickly switched on and off; 1 spotlight; Equipped with 2 small windows (one spotlight port and one observation hole), reserved with one vacuum pressure gauge port, and other necessary connections (vacuum/vent/backup).
1-5 Mixing principle	The low gap design of the dual mixing slurry ensures no dead corners, and the low-speed mixing blade has strong kneading interference and up/down/left/right circulation motion, ensuring that the materials are fully dispersed and mixed.
1-6-1 Revolution/Mixing Motor and Variable frequency drive, reducer	A、 Quantity: One unit; B、 Motor power: 3Kw/4P; C、 Equipped with a frequency converter that matches the motor. D、 Matching reducer, reduction ratio I=40.26, service factor fa=1.55.
1-6-2a planetary revolution speed	Speed: 0~42 rpm, adjustable.
1-6-2b wall scraper	Quantity: 1 set; Scraping material: SUS304 and Teflon; Consistent with the speed of planetary revolution------- Based on design determination
1-7-1 Mixing shaft/mixing slurry speed	Speed: 0~97rpm, variable frequency speed regulation.
1-7-2 Mixing slurry	A、 texture of material: SUS304； B、 Quantity: Two (groups).
1-7-3 Selection of mixing slurry form	A、 Standard configuration: Fried Dough Twists
1-8-1 Distributed Motor	A、 Quantity: One unit; B、 Motor power: 4KW/4P; C、 Equipped with a frequency converter that matches the motor.
1-8-2 dispersion speed (rotation)	A、 Speed: 0~1440 rpm, adjustable;
1-8-3 dispersing shaft and dispersing disk	A、 texture of material: SUS304； B、 Two dispersed axes
1-9 lifting (crossbeam, transmission components, upper bucket body, planetary components)	Electric lifting: equipped with linear guide rails; Positioning device; Positioning is safe and reliable. Lift motor power: 0.18KW, lift height: to be determined
1-10 Positioning System	A、 Equipped with positioning adjustment device and locking device, it can accurately position the mixing drum and upper drum body, and prevent rotation. B、 The positioning stop of the lower flange of the upper barrel body is precisely matched with the mixing barrel to ensure that the position of the mixing barrel is reasonable and the positioning is accurate.
1-11 Vacuum System	A、 The stirring and dispersion process can be carried out in a vacuum state; Vacuum degree: ≤- 0.09Mpa.
	B、 Sealing material: The dynamic seal is a combination of PTFE and fluororubber, and the static seal is fluororubber..
	C、 Dynamic seal: using mechanical seal; D-2、 Static sealing: using O-ring seals.
	D、 Including vacuum pump
1-12 Distribution Cabinet	The display and operation of functions such as variable frequency speed regulation, spotlight, lifting, and emergency stop during equipment operation are all carried out on the distribution cabinet.
1-13 Safe Operation	A、 By relying on a frequency converter and limit travel switch, a specially designed control route ensures that the upper bucket body automatically stops when it reaches the specified position.
1-13 Safe Operation	B、 During the upward movement of the upper bucket, the mixing and dispersing part of the equipment cannot start running; Similarly, when the machine is running the mixture, the upper bucket cannot be raised and the mixing bucket cannot be opened.
1-14 Temperature measurement method	0-150 ℃, the temperature probe is located on the barrel wall near the bottom, in direct contact with the material.

Product Display: