2/2-way three piece electric ball valve

Product Introduction

Electric ball valve, three piece threaded connection, using ISO5211 direct installation platform, can also use connection bracket and adapter shaft for isolation when the medium temperature is too high.

Valve body: carbon steel, stainless steel, other special materials can be inquired separately
Valve ball: stainless steel
Valve stem: stainless steel
Seat: PTFE, other materials may vary depending on the medium. Please inquire separately
Caliber range: 1/2 '-4' (DN15-DN100)
Connection methods: threading, welding, clamps, flanges, etc
Work pressure: PN63, special pressure is provided as needed

Executor: Optional switch type, adjustable type (4-20mA), fail safe type, and explosion-proof type
Voltage range: 90-240V 50-60Hz or 90-350 VDC, 15-30V 50-60H or 12-48V DC, 400V three-phase
Plastic PA6.6 (UL94 V0 insulation grade) shell, aluminum base, aluminum shell available on demand, standard external manual device for manual operation in case of malfunction
The travel time can be selected as fast opening or slow opening, with a load cycle of S4-30% -50% (IEC34 standard) and S4-80% optional.
Environmental temperature: -10 ℃ -+55 ℃, enclosure protection level IP65, IP66 or IP67
Torque range: 10-20-35-60-100-150-300-600-1000Nm
Standard configuration includes a pair of passive contact signals for opening and closing, electronic torque limiters, overload protection, fault reporting system, thermal resistors, etc

If you need valve size drawings, please contact us!