New product developed by Jiangyin Zhongtai - Vibration Intensity Wall Monitoring Instrument

The ZT6302L wall mounted vibration intensity monitoring instrument is a precision measurement and control instrument widely used in departments such as power, petroleum, and chemical engineering. By using magnetic electric speed sensors, the vibration intensity of rotating machinery such as steam turbines and fans can be continuously monitored. It has alarm and shutdown control signal output. Equipped with a universal interface for current output, it can be connected to equipment such as DCS, PLC, and computers. The monitor adopts LED digital display, PVC color facial mask and light touch keys, with beautiful appearance, novel style, reasonable structure, simple installation, stable performance and reliable quality.
2. Main functions
● Display function
The vibration measurement value, I value alarm, and II value alarm set values can be displayed separately on the LED digital tube.
● Alarm function
When the vibration amplitude exceeds the alarm set value, the alarm indicator light will turn on, and at the same time, a switch signal will be output on the rear panel to protect the monitored equipment.
● Alarm delay time setting function
The adjustment range for alarm delay time is 0-3 seconds to prevent false alarms caused by on-site interference.
● Self diagnostic function
Equipped with power on and power off detection functions, while disconnecting the alarm output circuit, it can effectively suppress false alarms of the instrument.
● Output interface
Equipped with a current output interface, it can be connected to devices such as computers.
3. Main parameters
● Sensor input: magneto electric speed sensor
Sensitivity: 20 mV/mm/s ± 5%
Frequency response: 10-300Hz
Input impedance:>100K Ω
Measurement range: 0-50.0mm/s (true effective value)
Measurement accuracy: Linear error ≤ ± 1% (full-scale value)
● Display mode: 3-digit digital tube display
● Current output: 4-20mA Output load: ≤ 500 Ω
● Alarm contact capacity: DC28V 3A
Working environment: Temperature: 0-65 ℃ Relative humidity: ≤ 85%
● Working power supply: AC 220VAC ± 10% 50Hz power consumption ≤ 20W
4. Selection Guide
The ZT6302L wall mounted vibration intensity monitoring instrument must be equipped with a CD-6 magnetic electric speed sensor.
● Selection code

ZT6302—A □□—B□□—C□□—D□□

ZT6800853/854—A □□—B□□—C□□—D□□

Range selection: A □□
0 1: 0～10.0mm/S
0 2: 0～20.0mm/S
0 3: 0～25.0mm/S
Current output: B □□
0 1: 4～20mA
0 2: 0～10mA
Sensor selection: C □□ (magneto electric speed sensor)
0 1: CD-6 type
Alarm delay: D □□
0 1: 0.1 seconds
0 2: 1 second
0 3: 3 seconds
Main products:ZT6101 Intelligent Speed Monitoring Instrument、ZT6201 Axial Displacement Monitoring Instrument、ZT6202 Differential Expansion Monitoring Instrument、ZT6301 Shaft Vibration Monitoring Instrument、ZT6302 vibration monitoring instrument、ZT6303 eccentric monitoring instrument、ZT6303 eccentric monitoring instrument、ZT6501 type thermal expansion stroke monitoring instrument、ZT6502 Hydraulic Motor Travel Monitoring Instrument、ZT6503 type fuel tank oil level monitoring instrument、ZT6800 series turbine monitoring system、CZ-01 Magnetic Resistance Speed Sensor、HE-01 Hall Speed Sensor、DO-02 eddy current sensor、CD-6 vibration speed sensor、TD-1 hydraulic engine sensor、UT-81 series fuel tank oil level sensor、ZT-B10 speed transmitter、ZT-B20 travel transmitter、ZT-B30 axial displacement (differential expansion) transmitter、ZT-B40 Bearing Vibration Transmitter、ZT-YB40 integrated vibration transmitter、ZT-WB series temperature transmitter、ETS system ETS system、Eddy current debugging rack