Double forum! This grand event of the motor industry chain is not to be missed!

The competition in the motor industry is shifting from "being able to turn" to "turning more efficiently, accurately, quietly, and intelligently".

The household appliances in motors continue to upgrade towards slimness, high speed, and intelligence. The motor system needs to improve efficiency and power density while also considering noise, reliability, and cost;

The accelerated development of humanoid robots, collaborative robots, AMR/AGVs, and other markets in electric motors has raised higher requirements for torque density, control accuracy, dynamic response, and thermal management of joint modules.

When the motor body, power devices, drive chips, sensors, control algorithms, and testing validation are deeply coupled, the performance improvement of a single link is no longer sufficient. How to select components, optimize systems, shorten verification cycles, and stably introduce technical solutions into mass production has become a common problem faced by the motor industry chain.

On October 30th, the "2026 China Motor Intelligent Manufacturing and Innovation Application and Motor Industry Chain Exchange Conference (Autumn)" (hereinafter referred to as the Motor Conference), hosted by Big Bit Business Network and organized by "Semiconductor Device Application" magazine, will be held in Shenzhen.

What are the reasons not to miss this motor conference?

　　PART 01

　　Upgrading two major application markets

　　The motor system requires collaborative problem-solving

Household appliances in electric motors are simultaneously pursuing high energy efficiency, miniaturization, low noise, and intelligent control.

Taking high-speed hair dryers, handheld vacuum cleaners, floor scrubbers and other products as examples, increasing the speed and power density will make temperature rise, vibration and noise problems more prominent; Household appliances such as washing machines and air conditioners pay more attention to frequency conversion efficiency, load adaptation, long-term reliability, and fault warning. Improving only the motor body is difficult to balance all indicators.

The constraints faced by robot joints are more complex. The motor, reducer, encoder, sensor, and drive system need to be integrated in a limited space while achieving high torque, high precision, fast response, and stable heat dissipation. From prototype to mass production, products also need to address issues such as component consistency, testing and validation, production yield, and supply assurance.

The two application tracks point towards a common change: motor competition has entered the stage of system collaboration. Whole machine manufacturers, motor and module manufacturers, chip companies, material and sensor suppliers need to jointly develop around the same application requirements, which is the starting point for building a communication platform at this conference.

　　PART 02

　　Two forums of the motor conference are on the same stage

　　Break down difficult problems into specific applications

This year's motor conference will include the 32nd Motor Drive and Control Technology Seminar (for household appliances) and the 4th Intelligent Robot Key Module Technology Innovation Seminar.

The motor conference special session on household appliances focuses on how to balance efficiency, volume, noise, and cost.

At the motor body end, the Motor Conference Life Appliances Forum will focus on the design of IE5/IE6 ultra-high energy efficiency permanent magnet synchronous motors under the iteration of global energy efficiency regulations, and discuss how BLDC motors can improve speed and power density in a smaller volume through structural and material optimization, combined with folding hair dryers, portable hanging irons, handheld vacuum cleaners and other products.

At the drive control end, the motor conference and household appliance conference will discuss what efficiency and volume improvements SiC/GaN power devices can bring after entering the household appliance variable frequency drive, as well as how to promote cost reduction towards consumer level applications.

The issue of intelligence will fall into specific categories such as household appliances, washing machines, and air conditioners. How does the AI load adaptive algorithm adjust the motor operation status based on changes in clothing weight, air volume, or working conditions? The conference on household appliances will also cover reliability verification throughout the entire lifecycle, including high temperature and humidity, salt spray, and long-term aging, to supplement the testing process for products from research and development to mass production.

The motor conference robot session focuses on answering the question of "how joint modules can achieve high torque, high precision, and high integration".

Around the joints of humanoid robots, the Motor Conference Robot Forum will compare the performance and applicable scenarios of axial and radial flux frameless torque motors, and discuss how to improve torque density and control temperature rise in a limited space after integrating the motor, reducer, encoder, and drive system.

Power devices, sensors, and algorithms form another main thread of the robot drive system. How can SiC/GaN devices support high-frequency control? How to complete the selection, calibration, and error compensation of torque and position sensors? The content of AI flexible force control, collision detection, and adaptive trajectory adjustment will be combined with actual control requirements.

From prototype to mass production, testing efficiency, heat dissipation, and cost are equally crucial. The Motor Conference Robot Forum will focus on how HIL hardware in the loop testing can accelerate joint module verification, how to choose thermal management solutions such as air cooling and liquid cooling under overload conditions, and how service robots can improve yield and reduce costs through driving module optimization.

The forum on household appliances and robots at the motor conference not only discusses technological trends, but also focuses on how to select components, adjust systems, test products, and reduce costs, allowing participants to find answers from practical research and production issues.

　　PART 03

　　Centralized display of the entire motor industry chain

　　Selection is no longer solely based on parameter table settings

After listening to the motor technology direction of the meeting, we also need to see real products and solutions.

An innovative achievement exhibition area will be set up at the motor conference site, with exhibits covering motors and modules, permanent magnet materials MCU、 Power devices, driver chips, sensors, encoders, reducers, thermal management materials, and testing equipment run through the main links of household appliances and robot motor systems.

Previous pictures of the motor industry conference

From the current exhibition lineup announced at the conference, participating companies in the motor conference include Shanghai Beiling, Lingdong Microelectronics, Xinpeng Microelectronics, Xinmai Semiconductor, Wuhan Xinyuan Semiconductor, Huichun Technology, Yuanneng Xin Technology, Yingneng Electronics, etc., with product directions covering motor control MCUs, power devices, drive chips, power management, and system solutions.

Previous pictures of the motor industry conference

For whole machine enterprises and R&D engineers, coming to the motor conference booth can directly understand the efficiency, temperature rise, control accuracy, integration and reliability of the components under specific working conditions, further confirming samples, development tools, technical support and supply capabilities.

Previous pictures of the motor industry conference

For suppliers, on-site motor conference presentations are also an important opportunity to meet terminal requirements, verify product positioning, and explore new applications. Compared to individually reviewing product manuals, comparing multiple routes on the same site is more helpful for enterprises to improve the efficiency of selection and scheme evaluation.

PART 04

Motor Conference Face to Face Supply and Demand Exchange

Drive the plan towards mass production

A product that meets performance standards does not necessarily mean it can enter the motor industry supply chain.

Whole machine enterprises need to evaluate performance, price, validation cycle, production capacity, and delivery stability simultaneously; Suppliers also need to accurately understand customers' working conditions, project milestones, and certification standards. If the information transmission between both parties is insufficient, the product is easily stuck in the sample delivery and testing stage for a long time.

Previous pictures of the motor industry conference

This motor conference will establish a face-to-face communication platform between complete machine enterprises, module manufacturers, and core suppliers, focusing on practical needs such as localization substitution, component selection, customized development, cost optimization, yield improvement, production capacity guarantee, and global compliance for motor industry docking.

Enterprises can bring specific projects and technical issues to the site during meetings, clarify power, speed, noise, temperature rise, volume, and cost targets, and match suitable products and cooperation resources during motor industry conferences and exchanges.

The value of supply and demand docking in the motor industry conference is not just about exchanging business cards, but also shortening the chain of demand communication, helping technical solutions move from "usable" to "verifiable, stable delivery, and large-scale production".

A valuable conference on the motor industry should not only help companies see the technological direction clearly, but also solve practical problems in product selection and project cooperation.

On October 30th, at the Shenzhen conference, the two major forums for household appliances and intelligent robots were held on the same stage, and resources for motor bodies, chip devices, sensing control, testing and verification, and mass production were gathered together. If you are promoting the upgrade of motor products or hoping to enter the supply chain of household appliances and robots, this conference is not to be missed!