HES810 speed increasing tool holder, high-precision machining achieved by machining center/milling machine

If a machining center or milling machine wants to perform high-precision milling, engraving, high gloss and other processing on workpieces, this HES810 speed increasing tool holder is available in various models such as BT30, BT40, BT50, HSK A63, etc. The speed can reach up to 80000 revolutions per minute, and the jumping accuracy is within 0.001mm.

The above picture is a physical image of the HES810-BT30 speed increasing tool holder for the Nakanishi NAKANISHI high-speed electric spindle. The spindle can be connected to the machine signal with a controller, with an output power of 350W, and can only hold tool shank diameters ranging from 0.5 to 4.0mm,Only suitable for small diameter milling cutters and drill bits, used for milling and drilling.

The Nakanishi high-speed electric spindle HES810-BT30 is recommended to use a speed of 50000-80000min-1, which can enable your machining center/milling machine to achieve higher speeds and precision machining capabilities.