Intelligent power transmitter is an instrument that converts the measured electrical parameters into DC current and DC voltage, and isolates and outputs analog or digital signals. It can be used to measure various electrical quantities such as voltage, current, active power, reactive power, frequency, power factor, etc. in power plants and substations. Using a microcontroller as the control core, it can measure all electrical parameters such as voltage and current of three-phase four wire or any other wire system, and is an updated product of traditional power transmitters. Widely used in industries and departments such as power, postal and telecommunications, petroleum, coal, metallurgy, railway, municipal, and intelligent buildings for electrical installations, automatic control, and dispatch systems.
It can monitor the voltage, current, power and other parameters of the power grid in real time, and transmit the data to the monitoring system for processing and analysis. The following are the steps for using an intelligent power transmitter:
1. Installation equipment: Firstly, it needs to be installed in the power grid, usually behind the electricity meter or in front of the power switch. During the installation process, attention should be paid to the wiring of the equipment to ensure correct and error free wiring.
2. Connecting communication lines: will be connected to the monitoring system, usually using RS485 or Ethernet communication methods. During the connection process, attention should be paid to the wiring of the communication lines to ensure correct and error free connections.
3. Configuration parameters: After the device installation and communication connection are completed, parameter configuration is required, including grid voltage, current, power factor, and other parameters. After the configuration is completed, parameter verification is required to ensure that the parameter settings are correct and error free.
4. Start the device: After completing the parameter configuration, the smart power transmitter needs to be started to monitor the voltage, current, power and other parameters of the power grid in real time. During the startup process, it is necessary to pay attention to the working status of the equipment to ensure its normal operation.
5. Data transmission and processing: Real time monitoring of voltage, current, power and other parameters of the power grid, and transmitting the data to the monitoring system for processing and analysis. Attention should be paid to the accuracy and completeness of data transmission and processing to ensure their normal operation.
6. Maintenance: Regular maintenance is required, including cleaning equipment, replacing vulnerable parts, etc. During the maintenance process, attention should be paid to the safety and stability of the equipment to ensure its long-term stable operation.