The importance of cleaning stainless steel water tanks

Stainless steel water tanks, as storage containers, provide great convenience for our daily lives. But while we enjoy its convenient service, there is also a problem that cannot be ignored: the cleaning and disinfection of the stainless steel water tank.

No matter what the purpose of water is, everyone hopes that the water they use is clean and hygienic. During the transmission of water, from the starting point to the end point, tap water passes through countless pipeline channels and eventually reaches us. Although these waters are disinfected before leaving the factory, if stored improperly, the water quality is easily subject to secondary pollution. Therefore, the hygiene and safety of stainless steel water tanks directly affect the water quality at the endpoint, which in turn can affect everyone's health. The water in a stainless steel water tank may be used or consumed by countless people. It can be said that the cleaning and disinfection of stainless steel water tanks is a livelihood project.

Advantages of stainless steel water tank cleaner compared to manual cleaning

Product Introduction

This device is mainly suitable for secondary water supply tanks (pools), etc. It is controlled and installed in the water tank using automation technology and mechanical principlesmiddleThe cleaning unit of the water tank rotates at a constant speed in the quan direction, while shooting out a high-pressure water column to shoot down the dirt, impurities, moss and other harmful substances adhering to the inner wall of the water tank (pool), and discharge them with the bottom of the sewage, achieving a three-dimensional cleaning effect. The scientific cleaning method has unique characteristics compared to traditional manual cleaning.

Product Features:

1. Cleaning direction: It can scan, clean, and disinfect the inner wall of the water tank (pool) in three-dimensional space.
2. High degree of automation: The control circuit adopts imported programmable logic controller (PLC) to automatically control the entire system to complete the cleaning process. The circuit design is advanced, safe and reliable.
3. Good disinfection effect: The disinfectant mainly uses chlorine dioxide, which has a broad-spectrum, high efficacy, and fast disinfection effect. It is safe, toxic, and has no harmful effect on the human body.
4. High efficiency and low energy consumption: Five exquisitely designed nozzles in different directions work simultaneously, with strong spraying force and high efficiency; The normal water consumption for cleaning a 20T water tank is less than 1 ton, and the power consumption is less than 1 kilowatt hour.
5. Short cleaning time: The entire cleaning process only takes about 20 minutes and does not require a long water outage.
6. Long service life: The equipment body is made of imported food grade stainless steel (SUS304) refined, and the product has a service life of over 30 years.

Working Principle:

The automatic cleaning and disinfection device for water tanks (pools) uses an automatic cleaner installed in the water tank (pool) to rotate at a constant speed and spray high-pressure water columns, shooting down dirt, moss and other impurities adhering to the inner wall of the water tank (pool), and quickly discharging them outside the water tank (pool); At the same time, the disinfectant is sucked out through the pipeline and sprayed out with the water column, achieving a three-dimensional cleaning and disinfection effect. The system completes the entire cleaning process in 20 minutes according to the set program, achieving automation of cleaning and disinfection.