-
Phone
13813156012
-
Address
Zhenxing North Road, Zhenwu Town, Jiangdu District, Yangzhou City, Jiangsu Province
Product Categories
- Plasticity testing machine
- Notch prototype
- Fatigue cracking testing machine
- Insulation resistance meter
- Compression stress relaxation instrument
- Mooney Viscometer
- Dumbbell prototype
- Roller Wear Machine
- Akron abrasion machine
- Hot deformation Vicat
- Rubber cutting machine
- Special film paper for vulcanizing tester Menni
- Double head slicer
- Hardness tester
- Vulcanizer, Rotorless Vulcanizer, Rheometer, Rotorless Rheometer
- Aging chamber, ozone aging chamber
- Buehler
- Film punching machine
- mould
- impact testing machine
- Thickness gauge
- Tensile testing machine
- Low temperature brittleness tester
- Servo tension machine
- Computer tensile machine
- Open mill
- Cutting knife
- Digital tensile machine
Yangzhou Zhengyi Experimental Machinery Co., Ltd
ZY simple suspension integrated impact testing machine
NegotiableUpdate on 04/24
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
ZY simple suspension integrated impact testing machine
Product Details
1、 Introduction
The ZY series simple suspension integrated impact testing machine is mainly used for measuring the impact toughness of non-metallic materials such as hard plastics (including plates, pipes, plastic foreign materials), reinforced nylon, fiberglass, ceramics, cast stones, and electrical insulation materials. The main technical parameters of this impact testing machine comply with the requirements of standards such as ISO179, GB/T1043, GB/T2611, JB/T8762, ISO180, GB/T1843, JB/T8761, etc. The main features of this testing machine are intuitive display, simple structure, easy operation, and accurate data.
2、 Parameters of simply supported beam:
Operating temperature (15-35) ℃
2. Impact speed: 3.8m/s
3. Impact energy: 7.5J, (15J, 25J, 50J are optional)
Impact swing moment: Pd7.5=4.01924N·M
Pd15=8.03848N·M
Pd25=13.39746N·M
Pd50=26.79492N·M
Accuracy: Angle (0.01 °) Energy (0.001J)
Pre swing angle of pendulum: 150 °± 1 °
Strike center distance: 395mm
Impact blade fillet radius: 2 ± 0.5mm
9. Impact blade angle: 30 ± 1 °
10. Jaw corner radius: 1.0 ± 0.1mm
11. Sample type, size, and distance of support line (unit: mm)
Sample type Length L Width B Thickness D Distance between support lines
Basic dimensional deviation Basic dimensional deviation Basic dimensional deviation
1 80 ±2 10 ±0.5 4 ±0.2 60
2 50 ±2 5 ±0.2 4 ±0.2 40
3 120 ±2 15 ±0.5 10 ±0.5 70
4 125 ±2 13 ±0.5 13 ±0.5 95
Technical parameters of cantilever beam
1. Operating temperature (15-35) ℃
2. Power supply: AC220 ± 10% 50Hz
3. Impact speed: 3.5m/s
4. Impact energy: 5.5J (1J, 2.75J, 11J, 22J are optional)
5. Impact swing moment: Pd1=0.535N•M
Pd2.75=1.4737N•M
Pd5.5=2.9474N•M
Pd11=5.8949N•M
Pd22=11.7898N•M
6. Accuracy: Angle (0.01 °) Energy (0.001J)
7. Pre swing angle of pendulum: 150 °± 1 °
8. Strike center distance: 335mm
9. Impact blade fillet radius: 0.8 ± 0.5mm
10. Distance from the impact blade to the top of the jaw: 22 ± 0.2mm
11. Sample type and size. The preferred sample is type 1, which is the preferred type. (Unit: mm)
A-notch 45 °± 1 ° notch bottom radius R0.25 ± 0.05mm
A-notch 45 °± 1 ° notch bottom radius R1 ± 0.05mm
Sample type Length L Width B Thickness D
Basic dimensional deviation Basic dimensional deviation Basic dimensional deviation
1 80 ±2 10 ±0.2 4 ±0.2
2 63.5 ±2 12.7 ±0.2 12.7 ±0.2
3 63.5 ±2 12.7 ±0.2 6.4 ±0.2
4 63.5 ±2 12.7 ±0.5 3.2 ±0.2
The ZY series simple suspension integrated impact testing machine is mainly used for measuring the impact toughness of non-metallic materials such as hard plastics (including plates, pipes, plastic foreign materials), reinforced nylon, fiberglass, ceramics, cast stones, and electrical insulation materials. The main technical parameters of this impact testing machine comply with the requirements of standards such as ISO179, GB/T1043, GB/T2611, JB/T8762, ISO180, GB/T1843, JB/T8761, etc. The main features of this testing machine are intuitive display, simple structure, easy operation, and accurate data.
2、 Parameters of simply supported beam:
Operating temperature (15-35) ℃
2. Impact speed: 3.8m/s
3. Impact energy: 7.5J, (15J, 25J, 50J are optional)
Impact swing moment: Pd7.5=4.01924N·M
Pd15=8.03848N·M
Pd25=13.39746N·M
Pd50=26.79492N·M
Accuracy: Angle (0.01 °) Energy (0.001J)
Pre swing angle of pendulum: 150 °± 1 °
Strike center distance: 395mm
Impact blade fillet radius: 2 ± 0.5mm
9. Impact blade angle: 30 ± 1 °
10. Jaw corner radius: 1.0 ± 0.1mm
11. Sample type, size, and distance of support line (unit: mm)
Sample type Length L Width B Thickness D Distance between support lines
Basic dimensional deviation Basic dimensional deviation Basic dimensional deviation
1 80 ±2 10 ±0.5 4 ±0.2 60
2 50 ±2 5 ±0.2 4 ±0.2 40
3 120 ±2 15 ±0.5 10 ±0.5 70
4 125 ±2 13 ±0.5 13 ±0.5 95
Technical parameters of cantilever beam
1. Operating temperature (15-35) ℃
2. Power supply: AC220 ± 10% 50Hz
3. Impact speed: 3.5m/s
4. Impact energy: 5.5J (1J, 2.75J, 11J, 22J are optional)
5. Impact swing moment: Pd1=0.535N•M
Pd2.75=1.4737N•M
Pd5.5=2.9474N•M
Pd11=5.8949N•M
Pd22=11.7898N•M
6. Accuracy: Angle (0.01 °) Energy (0.001J)
7. Pre swing angle of pendulum: 150 °± 1 °
8. Strike center distance: 335mm
9. Impact blade fillet radius: 0.8 ± 0.5mm
10. Distance from the impact blade to the top of the jaw: 22 ± 0.2mm
11. Sample type and size. The preferred sample is type 1, which is the preferred type. (Unit: mm)
A-notch 45 °± 1 ° notch bottom radius R0.25 ± 0.05mm
A-notch 45 °± 1 ° notch bottom radius R1 ± 0.05mm
Sample type Length L Width B Thickness D
Basic dimensional deviation Basic dimensional deviation Basic dimensional deviation
1 80 ±2 10 ±0.2 4 ±0.2
2 63.5 ±2 12.7 ±0.2 12.7 ±0.2
3 63.5 ±2 12.7 ±0.2 6.4 ±0.2
4 63.5 ±2 12.7 ±0.5 3.2 ±0.2
