Wood powder dryer

1、 Introduction to Wood Powder Drying Machine:
The new type of heat pipe wood powder dryer produced by our company uses heat pipes to indirectly heat materials, ensuring that the materials are not contaminated. Hot air enters and heats the heat pipes under the traction of the induced draft fan, and the heat pipes then transfer the heat to the materials. The materials pass through the gaps of the heat pipes, greatly increasing the heating area. During the drying process, water vapor can be discharged in real time from the top, avoiding secondary contact between water vapor and materials. At the same time, a heat recovery device is added at the tail end, which can recover and reuse the heat at the tail end, saving more than 50% energy compared to similar products on the market. It is a new, efficient and energy-saving wood powder drying equipment.

2、 Characteristics of Wood Powder Drying Machine:
1. The use of a new type of heat transfer pipe structure for good drying effect greatly increases the heating area of the material, while ensuring uniform heating of the material.
2. The high-efficiency energy-saving equipment has a forced dehumidification port on the top, which can discharge water vapor from the top in real time, avoiding secondary contact with materials.
3. Indirect heating: This machine uses heat pipes to indirectly heat materials, avoiding contamination from smoke and dust. The dried materials are clean and remain in their original state.
4. The processing capacity of this machine can quickly reduce the moisture content of materials to a safe value in a short period of time, and can operate continuously for a long time without interruption.
5. Small footprint, compact and reasonable structure, simple and flexible operation, easy to build and maintain.
6. The unique structure of this machine increases the heating surface area of the material and adds a heat recovery device, which can greatly reduce heat loss and save about 50% energy compared to traditional dryers.
7. Stable performance, reliable operation, low energy consumption, high thermal efficiency, good material drying effect, easy to achieve automation control, and few operators.
8. Flexible control can easily adjust the desired final moisture index according to user requirements.

3、 Scope of application of wood powder dryer:
The heat pipe type wood powder dryer produced by our company is widely used for drying and sterilizing high humidity materials such as sawdust, soybean residue, beer residue, fruit residue, cassava residue, sweet potato residue, etc. It has the characteristics of cost reduction, energy saving, reasonable process, compact structure, easy installation, simple operation, wide applicability, and strong universality. It is an ideal drying equipment for biomass pellets, machine-made charcoal, furniture, and feed industries.

Technical parameters of wood powder dryer

Model (m)	Tilt (%)	Speed (r/min)	Maximum intake temperature (℃)	Power (kw)
1*10	3-5	3-8	≤700	4
1.2*10	3-5	3-8	≤700	5.5
1.5*10	3-5	2-6	≤850	11