-
Phone
13391873383
-
Address
Room 1003, Building 66, BDA International Enterprise Avenue, No. 2 Jingyuan North Street, Yizhuang Economic and Technological Development Zone, Beijing
Product Categories
- Liquid processing
- storage cabinet
- fermentation tank
- balance
- Temperature, humidity, and light test chamber
- Measuring container
- Drying, cultivation, moisture-proof, vacuum box
- Skin - Cosmetic Efficacy - Analysis and Testing
- Muffle furnace
- Mixing and shaking shaker
- Circulating temperature control of water bath and oil bath
- Packaging paper testing
- Color difference analysis and detection
- clean bench
- High pressure sterilization pot
- Emulsifying disperser
Beijing Xinyue Zhongke Technology Co., Ltd
Viscosity constant temperature water bath, Jieaote, South Korea
NegotiableUpdate on 01/09
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The isolated design of the mixer, heater, and sensor (separated by shelves) maximizes the reduction of turbulence in the bath and also protects users and samples from contact. Security protection function with alarm. -Prevent low liquid level and no bath operation, over temperature protection, current overload protection.
Product Details
Performance Characteristics
- Temperature range: Room temperature+5 ℃ to 100 ℃
- Microfabrication PID controller/automatic adjustment/automatic calibration.
- The built-in blade stirrer can balance the temperature.
Easy to operate
- Digital LED display.
(Resolution at 0~99.9 ℃: 0.01 ℃, Resolution at 100~150 ℃: 0.1 ℃.) - Timer operation function. (1 minute to 99 hours and 59 minutes)
- Can store 3 sets of commonly used temperatures for easy access at any time.
- The standard stainless steel condenser tube ensures a slightly higher minimum temperature than room temperature.
(Using a cooling cycle can lower the operating temperature to a minimum of 10 ℃) - A hole with a diameter of 51mm can be used for capillary viscometer test tubes, and a hole with a diameter of 12.6mm can be used for thermometers.
- Standard RS-232 interface for external control and data collection.
Safety features
- The isolated design of the mixer, heater, and sensor (separated by shelves) maximizes the reduction of turbulence in the bath and also protects users and samples from contact.
- Security protection function with alarm.
-Prevent low liquid level and no bath operation, over temperature protection, current overload protection. -
It is an ideal choice for visual monitoring of samples.
-
model VB-25G VB-40G Bath capacity (L/cu ft)
25 / 0.9
40 / 1.4
Working temperature range2)( ℃ / ℉)
Room temperature +5 to 150/room temperature+9 to 302
Temperature stability1)( ±℃ / ℉)
0.05 / 0.09
0.1 / 0.18
size
Bath opening/depth (W × L, D) (mm/inch)
145×265, 330 / 5.7×10.4, 13
295×265, 330 / 11.6×10.4, 13
Viscosity test tube hole/thermometer hole (mm)
5ea / Ø51, 1ea / Ø12.6
8ea / Ø51, 1ea / Ø12.6
External dimensions (W × L × H) (mm/inch)
492×374×536 / 19.4×14.7×21.1
642×374×536 / 25.3×14.7×21.1
Net weight (kg/lbs)
28 / 61.7
37 / 81.6
Power requirement (230V)
60Hz, 13A 50Hz, 13A 60Hz, 13A 50Hz, 13A Cat. No.
AAH43301K AAH43302K AAH43401K AAH43402K 1) The technical parameters comply with DIN 12876 requirements. (Bath solution: water at 50 ℃)
2) If it is necessary to keep the temperature below room temperature+5 ℃ (room temperature+9 ℉), a condensing cycle can be optionally equipped.
Similar Product Recommend
