Ultra pure water machine

NegotiableUpdate on 03/19

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Adopting the best international process for preparing ultrapure water - the integrated process of reverse osmosis and mixed bed ion exchange. The reverse osmosis system removes over 99% of impurities such as particles, colloids, microorganisms, and large organic molecules, as well as 96-99% of various ions from raw water. Then, mixed bed ion exchange resin is used for deep desalination, fully utilizing the advantages of these two systems. Fully automatic water production, ready to use as needed. ...

Product Details

Product Appearance Diagram (CSR-1-05 Type)

Equipment parameters
Rated flow rate	≥ 5 liters/hour
Applicable water source	Municipal tap water
Applicable water pressure	＞0.1MPa
supply voltage	220V
rated power	<100W
flushing method	Automatic flushing
Chassis material	ABS
Length (mm)	410
Width (mm)	220
Height (mm)	420

The CSR series ultrapure water machine is an upgraded product of laboratory distilled water dispensers
product name		Standard type	Low organic matter type	Heat source removal type	integrative
PRODUCT MODEL		CSR-1-05 CSR-1-10 CSR-1-20 CSR-1-30 CSR-1-40 CSR-1-50 CSR-1-60	CSR-2-05 CSR-2-10 CSR-2-20 CSR-2-30 CSR-2-40 CSR-2-50 CSR-2-60	CSR-3-05 CSR-3-10 CSR-3-20 CSR-3-30 CSR-3-40 CSR-3-50 CSR-3-60	CSR-4-05 CSR-4-10 CSR-4-20 CSR-4-30 CSR-4-40 CSR-4-50 CSR-4-60
system flow		AC+PP+RO+DI	AC+PP+RO+DI+UV	AC+PP+RO+DI+UF	AC+PP+RO+DI+UV+UF
application area		Microanalysis, Environmental Analysis, Ion Chromatography, Trace Analysis, Atomic Absorption, Mass Spectrometry, Liquid Chromatography ICP、HPLC、 High standard solution preparation, medical testing, etc	Cell culture, trace organic matter analysis HPLC、PCR、TOC、 Environmental analysis, VOC/MS analysis, and other drug development and medical testing	Molecular Biology Experiment PCR、 Gene research and drug development, medical testing, cell culture IVF	DNA/RNA preparation, DNA sequencing HPLC、 Microbial applications, TOC testing PCR、 Immunodiagnosis, protein purification, analysis, biological research, etc
go out water water nature	Desalination rate	More than 99%
	resistivity	17.5－18.2 MΩ.cm
	conductivity	0.057－0.055μs.cm
	TOC	3-10ppb	1-5ppb	3-10ppb	1-5ppb
	endotoxin	——	——	<0.002Eu/ml	——
	microorganism	<1cfu/ml
Other indicators		Meets the national laboratory water specification GB6682-2000 and the electronic grade ultrapure water GB/T11446.1-1997 first grade water specification

　PP: Fine filtration AC: Activated carbon RO: Reverse osmosis DI: Ion exchange UV: UV sterilizer UF: Ultrafiltration
*Model Description: CSR - Purification Column Ultra Pure Water System
Type 1- Basic Type
Type 2- Basic Type+UV Sterilization Device
Type 3- Basic Type+Super Filter Heat Source
Type 4- Basic Type+UV Sterilization Device+Ultrafiltration Heat Source
-05, 10, 20, 30, 40, 50, 60- hourly water production
D type) - Deionized water inlet

explain:
When the TDS of the raw water is less than 300ppm, single-stage reverse osmosis can be used, and when the TDS of the raw water is greater than 300ppm, two-stage reverse osmosis can be used
When the hourly water output exceeds 50 liters, an industrial ultrapure water system can be selected