Ultra precision clean constant temperature box industrial oven

One,Ultra precision clean constant temperature box industrial ovenFeatures:

1.Adopting horizontal cross flow air supply,Uniform temperature,More suitable for drying a large number of products;

2.adoptHEPAHigh temperature and high-efficiency filter, with optional cleanliness100Level,1000level;

3.Adjustable intake and exhaust volume,Better drying effect;

4.The protective device—Leakage circuit breakerindependentThe safety protection devices such as over temperature protector and dry burning protector have improved the safety of the equipment;

5.The door seal adopts high-temperature resistant silicone strip,Better airtightness,pollution-free;

6.Adopting a high-performance program temperature controller from Japan,The program ends with a buzzing alarm, stable and reliable temperature control, and easy operation.

Secondly,Ultra precision clean constant temperature box industrial ovenTechnical Indicators:

1.Temperature range:R.T.+20℃～+200℃

2.Temperature uniformity:±2％

3.Temperature fluctuation:≤1.0℃

4.Studio size:450×450×450(deepD×wideW×highH)

5.Dimensions: Approximately670×1030×1700mm（D×W×H）

6.Heating time: (ambient temperature)25℃Measured when unloaded)

From room temperature~+250℃ about60minute

7.Power: Approximately3KW

8.power supplyAC220V 50Hz

air conditioning

1.Adopting oven long axis motor combined with multi wing wind turbine，Increase the uniform temperature of single-sided horizontal air supply;

2.Air conditioning method: forced ventilation, internal circulation, balanced temperature regulation（BTC）；

3.Air circulation device: built-in air conditioning device,third interviewCirculating air duct;

4.heatdeviceHigh quality nickel chromium alloyStainless steel wireheatpipe；

5.Ventilation rate:about2-3time/divide.

Room structure

1.Box structure: The box adopts a vertical structure, with a test box in the middle and a control cabinet in the upper part;

2.Shell material: high-quality cold-rolled steel plate with electrostatic spraying;

3.Inner wall material:SUS304Stainless steel plate;

4.Thermal insulation material: ultra-fine glass wool;

5.shelf：SUS304Stainless steel round bar2Layer;

6.Door sealing: using environmentally friendly silicone rubber;

7.Air intake and exhaust holes: There are air intake and exhaust holes set in the boxThe air inlet is located at the bottom of the box, equipped with an efficient filtering device, and the exhaust outlet is located on the left side of the top of the box;

8.Filter: Dust collection efficiency:0.3umparticle99.97%above