UV curing Intelli Ray 400/600

NegotiableUpdate on 03/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

UV curing Intelli Ray 400/600

Product Details

UV curing is a process that uses ultraviolet (UV) radiation to irradiate liquid "UV curable materials" and harden them, which we call the "UV Curing Process". UV curing or UV coating is a photochemical reaction The UV curing process is similar to the traditional drying process, but the principle is different. The traditional drying process is generally formed by the evaporation of the solvent in the coating material, while the UV curing crosslinking process is solvent free.

Fully functional UV light source

Intelli-Ray 400/600

Equipment Technical Parameters

Function Introduction	Technical Parameter
high strength large areaUVwelding	UV lamp irradiation6×8Inches（150×200mm）The solidification area and uniform distribution of light intensity,UVAstrength100mw/cm2.
Built in blackout shutter	The device integrates a retractable light blocking shutter, sets the exposure time, and protects users from ultraviolet radiation.
system timer	UVThe light is timed/In automatic mode, it can be set1arrive9999Second exposure timeWithin the set time, the shutter opens. In manual mode, the display time continuously increases until the exposure is manually stopped.
Light bulb intensity	Adjustable light source intensity（50%-100%, accuracy1％），Suitable for photopolymerization applications of light sensitive materials.
standby mode	UVWhen the shutter is closed, the device automatically reduces the power of the light bulb to50%To reduce additional heat and increase the lifespan of components.
logic signal	Equipment with15NeedleD-SUBexternalPLCInterface, capable of remote supervision and control.
PCSerial port control	Equipment withRS232/RS485Remote control interface, and can be accessed throughWindowsThe graphical interactive interface performs various control functions and even controls multiple devices through the network.
Foot pedal control	Optional foot pedal control. In automatic mode/In timed mode, the foot pedal triggers the timer to achieve exposure for the set time; In manual mode, press the foot pedal to open the shutter, release the foot pedal to close the shutter.
System indicator	Installed on the front panel4individualLEDpilot lamp, Indicating: bulb preparation, system standby, shutter on, and system alarm.
Power supply parameters	220~240Communication through Fu,50/60Hertz.
Forced air cooling	The device is equipped with a built-in fan and cooling system with filtering function, which cools all components and ensures high reliability of the system.
Optional light bulb	provideUVA, UVBEnsure adaptability to all adhesives and coatings with visible spectrum light bulbs.