Trace water analyzer

NegotiableUpdate on 05/08

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Trace water analyzers are applied in fields such as petrochemicals, raw gas, instrument gas sources, insulation gases for transformers and switchgear, gas cylinders, and air separation equipment. Measurement medium: Non corrosive gases (excluding CO2)

Product Details

Instrument features:
Built in 24V rechargeable lithium battery, can be used for more than 8 hours on a full charge
Can simultaneously display dew point temperature and moisture content PPM, and can recall historical data
Long calibration cycle and low maintenance cost
Accurate measurement and rapid response
Dew point measurement range as low as -100 ℃
Technical parameters:
Measurement range:- 80…-10℃
Non calibrated measurement range:- 100…-80℃，- 10…+20℃
Accuracy:- 80…-40℃ ±2℃

-40…-10℃ ±5℃
Sample gas flow rate: 2-3L/min, recommended 2L/min
Response time: Response time at gas temperature of 20 ℃ and pressure of 0.1MPa [90%]

-10... -80 ℃

-80... -10 ℃
Pressure working range: 0... 1 MPa
Working environment: Temperature: -30 ℃ to+70 ℃; Humidity: 0... 100% RH
Sensor: Imported sensor
Suggested calibration cycle: 2 years
Working voltage: DC24V power supply
Internal piping: 1/8 "stainless steel pipe
Connector: 1/8 "card sleeve
Dimensions: 335mm * 266mm * 175mm
Weight: Approximately 3kg